FUEL PUMP TURBO HIGH PRESSURE
TURBO05

(¥96) £96.00 exc vat

(¥115) £115.20 inc vat

In stockIn stock
FUEL PUMP FOR TURBO USE ONLY.

(¥96) £96.00 exc vat

(¥115) £115.20 inc vat

In stockIn stock

Recommended usage 1 x TURBO05 to fit one mini.

People also bought products
GASKET PUMP TO FUEL TANK FOR SPI AND MPI MINI
EDP9317

Gasket/seal for mounting the fuel pump to tank for SPI and MPI Mini's

(¥21) £20.70 exc vat

(¥25) £24.84 inc vat
FUEL UNION STRAIGHT 5/16" 8mm SINGLE ONLY
FPA903A

Only used for STC505 Facet pump range or solid state SS502 & SS503 and silver fuel pumps with 1/8" nptf thread size with 5/16" upgraded fuel line.

(¥2) £2.03 exc vat

(¥2) £2.44 inc vat
MECHANICAL FUEL PUMP GASKET
GUG705779GM

Paper gasket for either side of the spacer on all mechanical fuel pumps fitted on the rear of engines. The spacer with gaskets fitted is available as GUG705603GM.

(¥1) £0.52 exc vat

(¥1) £0.62 inc vat
FACET RUBBER MOUNT KIT
FPA905

this rubber mounting kit helps to dampen the pump ticking noise as well as acting as an earth

(¥5) £5.38 exc vat

(¥6) £6.46 inc vat
FUEL PUMP COMPETITION SOLID STATE FUEL PUMP
SS503

Solid state competition fuel pump with 6-00-7.252PSI 25 GALLONS PER HOUR.

Uses FPA 903 union or FP903A if you wish to upgrade fuel line size for extra flow theses are ideal for single HS4/6 or twin SU carbs.Next step up in pump is [link]STS5...

(¥57) £57.29 exc vat

(¥69) £68.75 inc vat
TURBO BALLAST FUEL PUMP RESISTOR
DRC3017

factory original fuel pump resistor for Turbos

(¥22) £21.77 exc vat

(¥26) £26.12 inc vat
CHOKE CABLE EARLY SINGLE HS2 TYPE "CHOKE" 65cm tot...
21A1202MS

Non-genuine version of the choke cable fitted to the early minis which does

not lock into place like the twin carb version. (see 21A1204).



It was made to work with the single HS2 carb and had only the word "CH...

(¥13) £13.00 exc vat

(¥16) £15.60 inc vat
GENUINE MINISPARES FUEL FILLER NECK GROMMET
14A7057GENUINE

Genuine Mini Spares product. The seal that goes on the neck of petrol tanks as protection against water intrusion and to also to make the hole look neater, so replace them when they crack or shrink through heat. This is the original fatter type as us...

(¥7) £7.24 exc vat

(¥9) £8.69 inc vat
PETROL HOSE 8MM (5/16") INJECTION RATED SOLD IN 1M...
LPH631

5/16" bore petrol hose for injection cars sold in metre lengths.

Resilient to heat,weather and suitable for ethanol in modern day fuels.100psi max.R9 spec.

(¥6) £6.35 exc vat

(¥8) £7.62 inc vat
CARB REBUILD KIT FOR HIF44 TURBO CARB
CRK269

complete rebuild kit for Turbo type HIF44 carbs including needle valve and throttle spindle plus disc.With damper clamp ring as fitted to turbo only

(¥87) £87.11 exc vat

(¥105) £104.53 inc vat
CARB HIF38/44 ABUTMENT BRACKET
CAM4942

Metal bracket that fits between the manifold and the HIF44 (1.75")carb to hold the cable - the choke cable clip for this bracket is CZK6491. Also for HIF38. For HS4 carb see 12G766 bracket. Original Turbo type [...

(¥12) £11.93 exc vat

(¥14) £14.32 inc vat
PETROL CAP ALLOY ASTON STYLE 3" PETROL CAP
MSA1145

Designed to look expensive this 60s look cap fits over the genuine Rover locking cap WLD100660 held on by grub screws. Polished alloy finish similar to the Aston or john Cooper cap it is ultra easy to install and looks fantastic. Flip to...

(¥24) £24.00 exc vat

(¥29) £28.80 inc vat
T PIECE 5/16"
MTP002

Fuel or water T piece adaptor

used when upgrading fuel system size on specials from 1/4" to 5/16" or any other modifications

(¥4) £4.28 exc vat

(¥5) £5.14 inc vat
CARB HS4 SERVICE KIT SU 1.5"
WZX1852

Carb repair kit less spindle and butterfly for single HS4 carbs-includes float needle valve and jet. Full repair kit with spindle etc is CRK227-----for waxstat type see CRK121, This kit is suitable for pre Waxstat (pre 74) Minis only

(¥55) £55.31 exc vat

(¥66) £66.37 inc vat
FLOAT NEEDLE VALVE & SEAT FOR HIF TURBO ONLY
WZX1095

Float needle valve for turbos fitted with standard HIF44 carb. Larger bodied valve.

Inlet size is 0.096". See also WZX1090 smaller bodied valve HIF6 MG Turbo

(¥22) £21.56 exc vat

(¥26) £25.87 inc vat
FLOAT REP KIT for HIF CARBS
WZX1509A

This float is ethanol tolerant and will fit all HIF38/44 carbs and the spindle is CUD2082 ..Quantity required-1 set for single carb.

Turbo uses WZX1095 needle valve. An expensive puncture proof stay up float is av...

(¥43) £43.25 exc vat

(¥52) £51.90 inc vat
HIF44 JET ASSEMBLY
WZX1453A

jet assembly (0.100") for the HIF44 carb only- see MGM10008 for HIF38(0.090")

(¥26) £25.76 exc vat

(¥31) £30.91 inc vat
THROTTLE DISC HIF44 TURBO ONLY
WZX1183

Throttle disc only for HIF44-if replacing the spindle there are 2 type,threaded one end only use WZX1127 and if threaded both ends use WZX1128

(¥15) £15.17 exc vat

(¥18) £18.20 inc vat
STUD HS4/HIF CARB + some 12G103 HOUSING (5/16")
CHS2514

Universal stud made for fitting the HS4/HIF carb to the manifold (except HS6 with alloy spacer on cast one piece manifold which requires CHS2515 (5.8mm longer)) and it also fits the cylinder head to take the thermostat housi...

(¥1) £0.78 exc vat

(¥1) £0.94 inc vat
PETROL TANK RETAINER RING FOR SENDER UNIT SEAL
ARA1501

Saloon petrol tank retainer clip for the rubber seal on the sender unit which is ARA1502 .Early tanks had 6 screws holding the sender unit in place and used gasket GUG705711GM

(¥1) £1.35 exc vat

(¥2) £1.62 inc vat