USED 17 TOOTH SPEEDO PINION
22A1881MS

($14.79) £14.79 exc vat

($17.75) £17.75 inc vat

Out of stockOut of stock
:USED: Speedo cable drive pinion in the gearbox with 17 teeth, it was used with a 6 tooth drive spindle on all 10" wheel cars pre 1980.

Either brown or plain white sort of colour about 20.50mm to 21.12mm in diameter and very similar to DAM2904 with green end which was paired to a 5 tooth spindle but is often used without problems although not a true supercession.

Green mainly denoted original origin of 3.4 final drive in somes Mini Metros. CLEAN PINION TEETH BEFORE FITTING

SECOND HAND UNITS of original 22A1881 are available only in limited quantities AS NEW ONES ARE OBSOLETE but we often have used stock of DAM2904MS.

Plastic worm gears used on production minis.

15 teeth TXD10004 black worm

16 teeth DAM2905 green worm

17 teeth 22A1881 clear/white worm

18 teeth TXD10006 grey worm special size

($14.79) £14.79 exc vat

($17.75) £17.75 inc vat

Out of stockOut of stock

Recommended products
SPEEDO PINION GASKET
GUG705565GM

Follow your speedo cable to the gearbox and it screws onto an alloy housing bolted to the gearbox. This is the gasket between the housing and the gearbox.

($2.22) £2.22 exc vat

($2.66) £2.66 inc vat
GASKET SPEEDO HOUSING INSPECTION GASKET
GUG705564GM

for the inspection plate on the front cover of the transmission where the speed cable goes to -it has 2 bolt holes cut out

($0.48) £0.48 exc vat

($0.58) £0.58 inc vat
SPEEDO PINION COVER OIL SEAL.
AAU2304

Oil seal for speedo drive pinion cover (DAM8488)

($1.00) £1.00 exc vat

($1.20) £1.20 inc vat
Alternative products
SPEEDO DRIVE PINION 17 TEETH-used GREEN
DAM2904

OLD USED 17 tooth 17 tooth pinion-Can use 22A1881 for green 17 tooth green pinion as used on 3.4 diff Metro- often used by customers in place of 22A1881 which work fine- used on all early minis with 3-76 or 3-44 diff with o...

($15.60) £15.60 exc vat

($18.72) £18.72 inc vat
People also bought products
USED 7 tooth speedo drive worm
TXF10001MS

USED yellow colour coded 7 tooth splined speedo drive (23.4mm diameter worm)that fits in the gearbox to drive the TXD10004 15 tooth pinion that the speedo cable fits on and drives. Different helical pitch to other 7 tooth drive pinions.S...

($27.50) £27.50 exc vat

($33.00) £33.00 inc vat
"USED"5 TEETH SPEEDO DRIVE SPINDLE
22G2022MS

:Used: (secondhand) 5 tooth drive spindle mainly used on Metro range but includes ERA turbo mini with 3.2 final drive using 16 tooth plastic pinion.

Obsolete new but offered "used" in case a ratio change is required. The only drive spindle ...

($15.00) £15.00 exc vat

($18.00) £18.00 inc vat
USED 7 TOOTH SPINDLE
DAM6028MS

:USED:Blue colour coded this 7 tooth spindle was used in conjunction with 22A1881 pinion with 17 teeth for 3.1 final drive on 12" wheels - this was also used with 22A1881 17 teeth for 2.95 final drive mini. this worm part i...

($15.00) £15.00 exc vat

($18.00) £18.00 inc vat
"USED"6 TEETH SPEEDO DRIVE
2A3720MS

USED 6 teeth speedo drive spindle that mated with 17 tooth speed pinion 22A1881 on cars with 10" wheels before 1980 plus any year 1275GT. Also 12"wheel cars with 3.44 final drive 1984 on. On the Metro mini this was used with 17 and 18 te...

($15.00) £15.00 exc vat

($18.00) £18.00 inc vat
PRIMARY GEAR BACKING RING GENUINE
88G549GENUINE

Genuine Rover spacer that fits up against the primary gear on the crankshaft and held on by the "C" washer 22A319 - both these parts wear as well as the gear.

Mini Spares also produce a ring 2 thou thicker 88G549 to...

($13.00) £13.00 exc vat

($15.60) £15.60 inc vat
DIFF HOUSING LOCK TAB ROD CHANGE LH
42H500

Left hand differential lock tab as used on rod change boxes up until 1982 when they were not longer used. For R/H locktab see 22A962

($0.91) £0.91 exc vat

($1.09) £1.09 inc vat
DIFF HOUSING LOCK TAB ROD CHANGE RH
22A692

Right hand differential lock tab as used on rod change boxes up until 1982 when they were not longer used.

($1.35) £1.35 exc vat

($1.62) £1.62 inc vat
BAULK RING TO ORIGINAL ROVER SPEC PRE 2000
22G2033EVO

Mini Spares genuine part, made for reliability, because the current Rover 22G2033version is not good enough. These specials are CNC grooved for correct shape and machined for concentricity using the original type fixings to get the corr...

($13.23) £13.23 exc vat

($15.88) £15.88 inc vat
SPEEDO PINION COVER OIL SEAL.
AAU2304

Oil seal for speedo drive pinion cover (DAM8488)

($1.00) £1.00 exc vat

($1.20) £1.20 inc vat
GEARBOX 4SYNC REBUILD KIT INC DIFF PRE A PLUS STD ...
MSG17

Full rebuild kit with dihferential parts and standard layshaft.

Using only the original manufacturers of the bearings such as RHP because all the Budget bearings are not good enough for longevity or performance use.

This is a full...

($321.07) £321.07 exc vat

($385.28) £385.28 inc vat
DIFFERENTIAL THRUST WASHER 8 THOU OVERSIZE
BTA102

Genuine Rover fibre type are now 48 thou thick which is so tight it will probably lock your diff up, they used to originally be .035 thou. These are 43 thou oversize type for worn units but the correct size of 35 thou is available as BTA101<...

($1.80) £1.80 exc vat

($2.16) £2.16 inc vat
LAYSHAFT A PLUS PERFORMANCE
C-22A1739

Minispares were the first company to produce these layshafts for performance engine/gearboxes as the standard type would flex and resullt in the breakage of the bearings causing seizure. Produced in an upgraded material and heat treated to the correc...

($31.85) £31.85 exc vat

($38.22) £38.22 inc vat
SYNCHRO SPRING FOR 3 SYNCHRO
22A367

Synchromesh spring for the 3 synchro gearbox. Fits 1st/2nd and 3rd/4th hub.

3 required per hub and 6 per gearbox.

($0.72) £0.72 exc vat

($0.86) £0.86 inc vat
IDLER GEAR SHIM 134/.135" (YELLOW)
DAM4823

These are the later A+ type spec which rover superseded to when upgrading the idler gear material on injection cars. See workshop manual for shimming details

Quantity required is 2 per gearbox but the idler gear requires shimming for correct...

($16.80) £16.80 exc vat

($20.16) £20.16 inc vat
REMOTE HOUSING SHORT BOLT 3/8" x 1" UNC
GFK5240

Remote type gearboxes had four UNC bolts holding the long alloy housing to the differential case. These are the shorter two, 3/8"unc 1"long. The longer two are ZCS628.

Also the bolt to hold the starter motor.

Also the bolt for the [...

($0.32) £0.32 exc vat

($0.38) £0.38 inc vat
PINION "C" SHIM .004"
GUG705646GM

The shims go against the mainshaft double roller bearing securing cap in your gearbox to give it pre load. See workshop manual for advice but you are aiming for only 1 thou pre load.

($0.79) £0.79 exc vat

($0.95) £0.95 inc vat
SINGLE ROW RHP ROLLER. 4 SYNCHRO
ADU7619

Genuine 1ST Motion shaft SINGLE track original bearing for 4 synchromesh 1st motion shaft.

This is a Genuine RHP bearing, and should not be confused with cheap alternatives. The cheap aftermarket bearings often fail and the work involved to...

($34.97) £34.97 exc vat

($41.96) £41.96 inc vat
GAITER FOR ROD CHANGE GEAR CHANGE SEAL
DAM3022

Actually the concertina dust cover for the rod change oil seal to prevent road debris attacking the seal. See MSSK050 kit when undertaking this job.

($1.95) £1.95 exc vat

($2.34) £2.34 inc vat
PRE A+ 1ST MOTION NEEDLE ROLLER.
CHM172

This little roller bearing goes inside the end of the 1st motion shaft on minis with 14mm mainshaft which it sits on.

This bearing was previously part number 88G409 and a true Rover replacement, but if you have earlier A type gears with the...

($3.75) £3.75 exc vat

($4.50) £4.50 inc vat
COMPETITION STEEL BAULK RING
C-22A1741

Mini Spares Performance Baulk ring.

The standard sintered baulk (synchro) rings are not tough enough for the demands of performance useage, in many instances lasting only one race before failure or breakage. The main reason is the incompat...

($35.36) £35.36 exc vat

($42.43) £42.43 inc vat