DISTRIBUTOR 123 ELECTRONIC IGNITION NON VAC A+

The all new 123 Electronic distributor is now available at Minispares. Featuring 16 ready programmed switchable advanced curves built in as standard, a must for any mini with a worn distributor. Full instructions are included with the system. For any...

($243.00) £243.00 exc vat

($291.60) £291.60 inc vat

DISTRIBUTOR ELECTRIC EVOLUTION PERFORMANCE TO 276 ...

C-27H7701

A Plus Electronic Ignition distributor with vac unit, modified to our spec in UK to give best performance on any minis with std to 276 camshaft profile.

Ideal for our EVOLUTION001 camshaft

Brand New distributor complet...

($82.50) £82.50 exc vat

($99.00) £99.00 inc vat

DISTRIBUTOR ALDON RED A PLUS

ALDONRPLUS

This is a race or high performance disributor for A Plus engines and can be fitted with points or LU143A ignition pack can be fitted as an extra

Distributor drive spindle if required is 12G3560

Distributor clamp plate...

($162.68) £162.68 exc vat

($195.22) £195.22 inc vat

LUMENITION FOR 45D DIST ON

MTK007

Electronic ignition kit to fit 45/59D4 distributors.

Designed to do away with points this is a simple drop in installation to fit into your existing distributor. Also see our range of distributors with built in electronics--BAU1962MS & [lin...

($112.50) £112.50 exc vat

($135.00) £135.00 inc vat

DISTRIBUTOR CLAMP FOR A PLUS DIZZY 85 ON

TAM1671

Prong type clamp that bolts to the block and retains the A plus distributor in place. The screw is TAM1706.

Pre A plus clamp is 501134

($6.00) £6.00 exc vat

($7.20) £7.20 inc vat

COOPER S CONTACT POINTS 23 / 25D 32 OUNCE

GCS3001

original Lucas type 2 piece contact set made for the non vacuum type distributor fitted to original Cooper S with a stronger 32oz spring. This is the best quality set by far available that you can trust, although there are cheaper sets on the market...

($12.00) £12.00 exc vat

($14.40) £14.40 inc vat

PERFORMANCE 8mm PLUG LEAD SET RED

C-27H7779RED

Lots of things have been written about performance plug ignition wires but regardless of what you believe we all know that good wires are a must. This special competiton wires set from the Lucas factory has 8mm wire and the highest performance, no br...

($13.19) £13.19 exc vat

($15.83) £15.83 inc vat

COIL ORIGINAL SPORTS GOLD PERFORMANCE TYPE

MSC105

Best on the market, sports coil-Not Lucas. A standard coil can only do so much, and when compression is raised (as in most high performance engines) or improper fuel mixtures occur something better is needed. This sports gold coil with proven origina...

($20.70) £20.70 exc vat

($24.84) £24.84 inc vat

NGK SPARK PLUG TUNED ROAD ENGINES

BP7ES

A higher compression engine should have a colder spark plug. The engineers explain that it has to do with flame temperature and overheating the plug. I know from experience that my race engine will melt a street plug. Choose from the following NGK pl...

($2.10) £2.10 exc vat

($2.52) £2.52 inc vat

COIL FOR ELECTRONIC IGNITION - '89 ON

GCL143

This is the standard non ballast coil as used on the late Mini with factory electronic ignition for use with 65D distributor.0.9ohms.

GCL143 was the Genuine Rover part fitted part on 1275cc from 1990.

0.9ohms

GCL2...

($20.69) £20.69 exc vat

($24.83) £24.83 inc vat

NGK SPARK PLUG RESISTOR TYPE FOR TUNED SINGLE POIN...

BPR7ES

BPR6E factory fitted but this is the later NGK plug.

NGK has superceeded this plug to a BPR7EIX

($3.36) £3.36 exc vat

($4.03) £4.03 inc vat

HT LEAD SET RED SILICONE FROM LUMINITION

HV22

100% silicon insulation, silicon coated suppressed conductor,braided glass reinforcement,increased working temperature 0f minus 50C to +300 degrees with improved resistance to damp and water, great fitting and spiral bound wire giving instant and gre...

($29.25) £29.25 exc vat

($35.10) £35.10 inc vat

STAINLESS STEEL COIL BRACKET

8B12397

Also see 8B12398 which also includes coil cover sleeve in stainless steel.

($6.84) £6.84 exc vat

($8.21) £8.21 inc vat

NGK SPARK PLUG HIGH TUNE ROAD / RALLY

BP8ES

A higher compression engine should have a colder spark plug. The engineers explain that it has to do with flame temperature and overheating the plug. I know from experience that my race engine will melt a street plug. Choose from the following NGK pl...

($2.51) £2.51 exc vat

($3.01) £3.01 inc vat

LUMINITION SILICONE 8MM SUPER BLUE HT LEAD SET

BLS529

100% silcone translucent outer sheath, 8mm lead set with stainless steel wire spiral bound wire giving instant and greater resonance, Kevlar fibre core and a ferromagnetic layer for EMC suppression by Luminition. Top end of ignition lead sets.

($39.00) £39.00 exc vat

($46.80) £46.80 inc vat

COIL RUBBER COVER 1959-1996 FOR CONVENTIONAL SHAPE...

8G727

Introduced by the factory to erradicate water getting to the electric coils causing breakdowns this was used up until they introduced the plastic engine protection shield but many owners still played safe and fitted one anyway.

Made in plast...

($7.04) £7.04 exc vat

($8.45) £8.45 inc vat

PERFORMANCE 8mm PLUG LEAD SET

C-27H7779

Lots of things have been written about performance plug ignition wires but regardless of what you believe we all know that good wires are a must. This special competiton wires set from the Lucas factory has 8mm silicon wire and the highest performanc...

($13.19) £13.19 exc vat

($15.83) £15.83 inc vat

TIMING COVER AND FRONT PLATE FITTING KIT

MSSK063

Timing cover front plate and tensioner plate bolt and washer kit. Comes with all parts to fit the cover except for the counter sunk screws if fitting a duplex kit (our duplex kits all come with these).

($8.00) £8.00 exc vat

($9.60) £9.60 inc vat

CYLINDER HEAD HEATER TAP FITTING KIT

ADU9102FK

Fitting kit comprising of studs, nuts, plain washers, spring washers and a gasket

($1.60) £1.60 exc vat

($1.92) £1.92 inc vat

HEAD STUD AND NUT KIT WITH A+ FLANGED NUTS

C-AHT279A

This kit of head studs is the best available for road and lightly tuned engines. See the C-AHT280 set for highly tuned engines.

The material spec is alloy steel heat treated to 75 tensile tons per square foot minimum and finish...

($51.92) £51.92 exc vat

($62.30) £62.30 inc vat

MINI 1275 CAM LINER SET

MS3063

You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all late model 1275cc blocks (the ones without tappet covers on the back) It's almost too simple and thus often overlooked during a rebuild. Ca...

($15.75) £15.75 exc vat

($18.90) £18.90 inc vat

MINI SPARES COMBINED BLOCK/GEARBOX GASKET AND SEAL...

AJM100MS

Mini Spares best quality complete gasket and seal kit for engine block and gearbox,for all common engine types and sizes.

Also comes complete with Mini Spares Evolution clutch oil seal 13H2934MS, differential oil seals...

($26.00) £26.00 exc vat

($31.20) £31.20 inc vat