FUEL FILTER MPI FROM VIN WD169574

From the introduction of fuel injection systems in 1992, a fuel filter was mounted on the rear subframe. These should be replaced every 2 years or 24,000 miles, whichever is the sooner.

GFE7059 covers all SPI models and MPI up to chassis nu...

($12.00) £12.00 exc vat

($14.40) £14.40 inc vat

FUEL FILTER SPI/MPI UP TO VIN WD169573

GFE7059

From the introduction of fuel injection systems in 1992, a fuel filter was mounted on the rear subframe. These should be replaced every 2 years or 24,000 miles, whichever is the sooner.

GFE7059 covers all SPI models and MPI up to chassis nu...

($11.00) £11.00 exc vat

($13.20) £13.20 inc vat

FILTER KING FUEL PRESSURE REGULATOR IN 67mm ALLOY ...

FPR005

This combined fuel filter and regulator allows adjustment of fuel pressure for optimum power and fuel economy. The inlet and outlet are 5/16". The FPR004 is a glass dome version of the alloy bodied FPR005. should be used on all facet pum...

($59.33) £59.33 exc vat

($71.20) £71.20 inc vat

FILTER KING REGULATOR IN 85mm GLASS

FPR006

The new Filter king has been specially designed to provide a constant and steady flow of fuel under all driving conditions by means of a large and reactive membrane and the following claims are made. 7.9MM (5/16") FEED PIPES ONLY

prevents fu...

($64.91) £64.91 exc vat

($77.89) £77.89 inc vat

FILTER KING FUEL PRESSURE REGULATOR BY FACET 67MM ...

FPR004

This combined fuel filter and regulator allows adjustment of fuel pressure for optimum power and fuel economy.The inlet and outlet unions are universal for either 1/4" or 5/16" hoses. The FPR004 is a glass dome version of the alloy bodie...

($58.98) £58.98 exc vat

($70.78) £70.78 inc vat

MODIFIED HS4 JET FOR WAXSTAT CONVERSION

AUE1111

SU conversion Jet for conerting from a waxstat jet to conventional without having to buy a different linkage etc.

($41.00) £41.00 exc vat

($49.20) £49.20 inc vat

MINI MPI OIL FILTER

PH4952

Oil filter for twin point injection cars where it screws directly into the block.

See GFE210 for shorter filter when optional oil cooler fitted or access tight through other modifications.

($3.86) £3.86 exc vat

($4.63) £4.63 inc vat

SPIN ON OIL FILTER CONVERSION KIT

TAM2097FK

A kit to convert the early style cartridge oil filter to the later style spin on filter.

($20.11) £20.11 exc vat

($24.13) £24.13 inc vat

RAMAIR HS4/H4/HIF38 1.5" AIR FILTER

RS2-201-401

Ramair’s hugely successful range of filter kits, designed to bolt directly to the carburettor body, is used widely in both competition and street applications. The element is of sturdy construction, supported by a stainless steel cage and provides ma...

($48.11) £48.11 exc vat

($57.73) £57.73 inc vat

VITON TIPPED FLOAT NEEDLE VALVE FOR HS CARBS

VZX1100

This is the original type of needle valve that governs the plastic fuel float in your SU carb.

An alternative better upgraded version is available as CA90.

($9.75) £9.75 exc vat

($11.70) £11.70 inc vat

K&N WEBER 45DCOE FILTER 2.5"DEEP 45 DCOE

56-9104

Oval Air filter 7.25" long, 4.75" high and 2.5" deep for weber 40/45DCOE carbs.

($101.55) £101.55 exc vat

($121.86) £121.86 inc vat

PETROL TANK SENDER UNIT SALOON (1959-1964)

2A2163

Petrol tank sender unit for saloon models 1959 until 1964 screw on type, for Minis fitted with no voltage stabiliser.

($40.00) £40.00 exc vat

($48.00) £48.00 inc vat

PUROLATER FILTER BOWL TO HEAD SEAL

12A1591

This is the large seal for the early type oil filter assembly pre spin on type.

($3.00) £3.00 exc vat

($3.60) £3.60 inc vat

HIF44 CARB REPAIR KIT WITH PLAIN THROTTLE DISC

CRK162

($79.01) £79.01 exc vat

($94.81) £94.81 inc vat

GENUINE SU HS STAYUP FLOAT KIT

WZX1304

The new adjustable height StayUp® Float is resistant to modern ethanol based Fuels and has a military spec closed cell construction making it puncture proof. The ability to adjust the Float Arm allows for quick and easy minor alterations to Float lev...

($19.60) £19.60 exc vat

($23.52) £23.52 inc vat

PETROL TANK STRAP RETAINING BOLT

13H7583

5/16" UNF THREAD 2 1/2" LONG bolt commonly used for 21A2838 petrol tank strap

($0.59) £0.59 exc vat

($0.71) £0.71 inc vat

CAPTIVE NUT FOR FUEL TANK STRAP BRACKET 1976-ON

346071A

5/16" UNF cage nut as fitted to CZH3241 tank bracket on cars fitted with a 7.5 Gallon fuel tank. Uses 13H7583 bolt

($0.69) £0.69 exc vat

($0.83) £0.83 inc vat

PETROL TANK SALOON 7.5 GALLON 1974 UP TO INJECTION

ARP1043MS

Non Genuine, fits saloons from 1974 until the introduction of injection.

First fitted to 1275GT in 1974 with 12"wheels and all mini saloons from 1980 on

7.5 gallons or 34 litres capacity and the tank is retained by the single stra...

($200.00) £200.00 exc vat

($240.00) £240.00 inc vat

PETROL TANK NON GENUINE VAN/ESTATE/PICKUP

21A292

Non Genuine reproduction tank fits all the long wheel base Minis, except for the very early side-tank travellers. Also used on many kit cars and specials owing to its shape.

Because of the outside location of these tanks, the originals seem ...

($130.50) £130.50 exc vat

($156.60) £156.60 inc vat

CHOKE CABLE EARLY SINGLE HS2 TYPE "CHOKE" 65cm tot...

21A1202MS

Non-genuine version of the choke cable fitted to the early minis which does

not lock into place like the twin carb version. (see 21A1204).

It was made to work with the single HS2 carb and had only the word "CH...

($13.00) £13.00 exc vat

($15.60) £15.60 inc vat