Label | Part No | Description | Quantity | Comments | |
---|---|---|---|---|---|
1 | 21A291 | Petrol tank, genuine, Estate / Van / Pickup | 1 | See [LINK]21A291MS[/LINK] also | |
1 | 21A291MS | Petrol tank, stainless steel, Estate / Van / Pickup | 1 | ||
2 | ARH672 | Drain plug | 1 | C.W.E | |
3 | ARA967 | Drain plug washer | 1 | N.L.A | |
4 | 21A304 | Large nylon securing nut, rear | 3 | Available as kit [LINK]21A291FK[/LINK] | |
5 | AB614101 | Securing screw for [LINK]21A304[/LINK] | 3 | Available as kit [LINK]21A291FK[/LINK] | |
6 | 21A305 | Small nylon securing nut front | 3 | Available as kit [LINK]21A291FK[/LINK] | |
7 | AB614061 | Securing screw for [LINK]21A305[/LINK] | 3 | Available as kit [LINK]21A291FK[/LINK] | |
8 | AAU8340MS | Petrol tank sender unit | 1 | Estate / Van / Pickup | |
9 | GUG705711GM | Sender unit cork gasket, was 2H1082 | 1 | ||
10 | 53K165 | Tank unit screw | 6 | ||
11 | WLD100350 | Petrol cap chrome/polished, Van / Estate | 1 | Vented | |
11 | GSS154A | Locking vented petrol cap, stainless steel, Van / Estate | 1 | ||
11 | GSS212A | Locking vented petrol cap, black, Van / Estate | 1 | N.L.A - Use [LINK]GSS154A[/LINK] | |
11 | 88G482 | Petrol cap non vented , pre 1961 Estate (when tank internal) | 1 | N.L.A - No alternative | |
11 | WLD10027 | Black petrol cap, was NAM3927 vented, Van / Estate | 1 | N.L.A - Also fits saloon | |
12 | 21A2109 | Petrol cap seal, (supplied on all new caps) | 1 | ||
13 | 14A8152 | Fuel neck to body cowl | 1 | N.L.A | |
14 | 14A7057 | Fuel neck seal (part of [LINK]MS8[/LINK]2 kit) | 1 | ||
15 | 2A2069 | Sealing ring, neck to floor | 1 | ||
16 | 21A308 | Petrol pipe, (134” long original) | 1 | 138” with union | |
17 | 21A307 | Tank to pump 6 1/2” repair pipe with union | 1 | ||
18 | 21A2183 | Petrol tank 5.5 gallon R/H Cooper ‘S’ 1966 on | 1 | Optional fitment for all | |
19 | ARP1043 | Petrol tank 7.5 gallons capacity L/H | 1 | Uses [LINK]21A2838[/LINK] strap | |
19 | WFE10420 | Petrol tank 7.5 gallon (restricted neck for lead free) LH | 1 | Replaced [LINK]WFE10093[/LINK] | |
20 | 21A2838 | Diagonal retaining strap 7.5 gallon tank | 1 | Uses [LINK]GFK5184[/LINK] nut / [LINK]GFK1125[/LINK] washer | |
21 | WLD100350 | Petrol cap chrome (vented) saloon - (was 18G8601 non vented) | 1 | Except Injection | |
21 | GSS154A | Locking vented petrol cap, stainless steel, Saloon | 1 | Except Injection | |
21 | NAM3928 | Petrol cap black - Non vented, Saloon | 1 | N.L.A - Replaced by [LINK]NAM3927[/LINK] | |
21 | GSS212A | Locking vented petrol cap, black (was GSS212 non vented) | 1 | N.L.A - Use [LINK]GSS154A[/LINK] | |
21 | WLD100660 | Locking non vented petrol cap, stainless steel, Saloon | 1 | 1976 on (all Injection cars) | |
21 | GSS215 | Locking vented petrol cap, 3” round top (Wilmot Breedon type) | 1 | Except Injection | |
22 | XNB10007 | Petrol sender unit, when voltage stabiliser fitted, was AHU1029 | 1 | 1964 on twist in type | |
22 | 2A2163 | Petrol sender unit, when voltage stabiliser fitted, 1959-64 | 1 | N.L.A 6-screw type | |
22 | ARA959 | Petrol sender unit, when no voltage stabiliser fitted, 1963-64 | 1 | N.L.A twist in type | |
23 | ARA1501 | Metal locking ring | 1 | ||
24 | ARA1502 | Locking rubber seal ring | 1 | ||
24 | GUG705711GM | Gasket, fuel sender, cork (for early models) | 1 | Has six screw holes | |
25 | 21A1329 | Location plate for [LINK]21A2183[/LINK] R/H tank | 1 | Part of [LINK]MS82[/LINK] kit | |
25 | 14A6867 | Location plate tank support for L/H tank | 1 | ||
26 | ALA7905 | Anchor bracket, R/H tank | 1 | Part of [LINK]MS82[/LINK] kit | |
27 | 2A2231 | Lower strap short (part of [LINK]MS82[/LINK] kit) | 1 | 2 when Twin tanks | |
28 | 2A2226 | Upper strap long (part of [LINK]MS82[/LINK] kit) | 1 | 2 when Twin tanks | |
29 | 21A2331 | Joining pipe R/H to L/H tank (part of [LINK]MS82[/LINK] kit) | 1 | Uses [LINK]21A2332[/LINK] 5/16” hose | |
30 | CRC7575 | Plastic vent pipe | 1 | Was BAU2171M Per metre | |
31 | 21A919 | Petrol metal pipe 1/4” bore, Saloon 92” | 1 | Sold as 96” length | |
32 | PPK1 | 2 1/2” Braided flex hose 1/4” bore | 1 | Or as required | |
32 | 21A2332 | 2 1/2” Braided Flex hose 5/16” bore (part of [LINK]MS82[/LINK] kit) | 1 | Twin tank joining pipe | |
33 | PPK2 | 5” Braided flex hose 1/4” bore | 1 | ||
33 | PPK3 | 7 1/2” Braided flex hose 1/4” bore | 1 | ||
33 | PPK4 | 10” Braided flex hose 1/4” bore | 1 | ||
33 | PPK5 | 12” Braided flex hose 1/4” bore | 1 | See [LINK]PETROLPIPE[/LINK] also | |
33 | PPK6 | 15” Braided flex hose 1/4” bore | 1 | See [LINK]PETROLPIPE[/LINK] also | |
33 | PPK7 | 22” Braided flex hose 1/4” bore | 1 | See [LINK]PETROLPIPE[/LINK] also | |
34 | ACH5854 | Clip for Smiths type hose | 1 |
MS82 is a fitting kit for the 21A2183 Right hand fuel tank as fitted to Cooper "S" from 1966.
Note: see chart to identify correct petrol caps and availability on next page.