DIFFERENTIAL PERFORMANCE PIN WITH MOLYBDENUM COATI...
C-BTA164

($25.60) £25.60 exc vat

($30.72) £30.72 inc vat

In stockIn stock
Competition quality replacement diff pin with anti wear MOLYBDENUM coating for planet wheel surfaces and still cheaper than a standard Rover pin. Recommended for all differential rebuilds.Pay special attention to the condition of the planet wheels when rebuilding.This moly coated pin MUST NOT be used with the specially bushed planet wheels DAM6624BUSHED as it causes undue wear The bushed planet gears are available with the C-BTA166 pin in a kit as C-BTA167.

Minispares reiterates.DO NOT use this molybdenum pin with bushed type planet gears as in C-BTA167 Kit as it will cause undue wear.

($25.60) £25.60 exc vat

($30.72) £30.72 inc vat

In stockIn stock

Recommended usage 1 x C-BTA164 to fit one mini.
Differential - Qty 1

Alternative products
DIFFERENTIAL PIN GENUINE
22G2583

Genuine Rover Tuftrided diff pin, as fiited to all the later A+ gearboxes as a standard upgrade. These are the last genuine parts left and will not be available again

($23.28) £23.28 exc vat

($27.94) £27.94 inc vat
DIFFERENTIAL PIN AND BUSHED PLANET WHEEL DIFF KIT
C-BTA167

On certain motorsport events which include vigorous stopping and starting it is possible that the diff pin will wear badly or even break,this is due to the uneven load applied by the varying tolerances and poor machining of the planet gears.This kit ...

($62.72) £62.72 exc vat

($75.26) £75.26 inc vat
People also bought products
DIFF SIDE COVER WITH LUG FOR R/H ROD CHANGE
CHM84

Fits all minis except Autos and those with hardy spicer joints. It has the detent lug on for rod change R/H side. Sold singly.

These might be marked as 22G420 on the casting but they have the correct size bush and seal hole for...

($54.00) £54.00 exc vat

($64.80) £64.80 inc vat
DAM6624 PLANET GEAR WITH METAL BUSH FITTED
DAM6624BUSHED

This is the standard DAM6624 differentail planet gear but with a special bush inserted in the middle to run on our upgraded diff pin C-BTA166, which alleviates all the play and makes a smoother precision surface for longevit...

($25.13) £25.13 exc vat

($30.16) £30.16 inc vat
BRONZE THRUST WASHER FOR PLANET WHEEL PRE A+
2A7062

The bronze washer for the planet gears in the differential for pre A plus gearbxes. You can use the DAM5071 and cut the lips off.

($2.22) £2.22 exc vat

($2.66) £2.66 inc vat
DIFF COVER WHEN USING HARDY SPICERS "S" AND ROD CH...
22G420

These are the larger bore diff side covers when hardy spicers are fitted and they also have the flange to cover detent spring on side if fitted to rod change when converted to hardy spicer. Has a 50mm oil seal o/d and bush size 34.8mm.For the yoke o...

($52.50) £52.50 exc vat

($63.00) £63.00 inc vat
DIFF SIDE COVER PLATE BUSH "S" FOR 22G420
22G421

A bronze type bush that fits in the gearbox output shaft side cover on early automatics and Cooper S with hardy spicer type joints. These are larger than the standard mini or rod change engine gearbox types which take 2A3538.

($10.00) £10.00 exc vat

($12.00) £12.00 inc vat
PLANET GEAR IN DIFFERENTIAL
DAM6624

Planet gears for the differential are now manufactured by us as the genuine Rover product is obsolete. Beware of others on the market which must be checked before fitting as the overall dimensions in height seem to vary along with inferior/wrong mate...

($11.00) £11.00 exc vat

($13.20) £13.20 inc vat
CROWNWHEEL BOLT
ATA7043

This is an aftermarket high tensile shouldered bolt that engine and gearbox tuners are using, as the original shape head and high tensile type bolt is no longer available. For holding the crown wheel to the differential housing.

Sold individ...

($2.85) £2.85 exc vat

($3.42) £3.42 inc vat
THRUST WASHER FOR PLANET GEAR WITH LIP A PLUS
DAM5071

The latest model Mini differential still use thrust washers on the spider gears but now have a tab on one end to prevent them from rotating on the cage side of the diff. The cage of course is cast while the gear itself is much harder and thus the wh...

($2.70) £2.70 exc vat

($3.24) £3.24 inc vat
CIRCLIP FOR GEARBOX DIFFERENTIAL OUTPUT SHAFT
22G2688

Circlip that fits on the gearbox output shaft in the differential for the pot joint type cars. Sold singly 2 required per gearbox.

($2.94) £2.94 exc vat

($3.53) £3.53 inc vat
DIFF CAGE AND CROWNWHEEL BUSH
ATA7378

Bronze type bush is in the centre of all crownwheels in the gearbox plus another one is in the differential case opposite the end the crownwheel fits.

The bush after fitting will need to be reamed. Ream to 26.16mm 1.03"

($4.25) £4.25 exc vat

($5.10) £5.10 inc vat
LSD OUTPUT SHAFT - HARDY SPICER TYPE
C-BTA1262

Output shaft for LSD use with hardy spicer drive couplings. These shaft slip into the Mini universal Evolution Limited Slip to serve as the connection to the stock Cooper "S" type output coupling. Sold each, quantity needed is two.

($111.00) £111.00 exc vat

($133.20) £133.20 inc vat
DIFFERENTIAL PIN UPGRADE
C-BTA166

Standard replacement precision ground upgraded material standard diff pin. Recommended for all standard differential rebuilds. For performance, use C-BTA164 moly coated pin with standard planet gears. Pay special attention to the conditi...

($13.20) £13.20 exc vat

($15.84) £15.84 inc vat
LSD OUTPUT SHAFT - POT JOINT TYPE
C-BTA1263

Outputs for LSD when using inboard CV joints. Sold single with 2 needed per car.

($60.50) £60.50 exc vat

($72.60) £72.60 inc vat
STUD 5/16UNC 3.75"LONG FOR SPEEDO HOUSING
53K1474

5/16"unc stud 3.75"long for speedo housing case and uses unf the nut end. The washers are GFK1114 and the nuts GFK3212.

These are for the speedo housing case and sold individually but 3 required.

($2.88) £2.88 exc vat

($3.46) £3.46 inc vat
CROWNWHEEL/PINION 3.47 STRAIGHT CUT NOT LSD 17x59
C-BTA1001EVO

New Minispares Evolution straight cut crownwheel and pinion set 3.47. The crownwheel in these kits has a 20% wider gear than previously supplied, and a pinion made from Aero quality steel making it 20% tougher.17/59 teeth cont

Not for LSD se...

($247.50) £247.50 exc vat

($297.00) £297.00 inc vat
DIFFERENTIAL THRUST WASHER 8 THOU OVERSIZE
BTA102

Genuine Rover fibre type are now 48 thou thick which is so tight it will probably lock your diff up, they used to originally be .035 thou. These are 43 thou oversize type for worn units but the correct size of 35 thou is available as BTA101<...

($1.80) £1.80 exc vat

($2.16) £2.16 inc vat
CROWNWHEEL + PINION 3.1 RATIO
CWP3-1

A plus crownwheel and pinion with 59 teeth and 19 teeth respectively=3.105

($157.50) £157.50 exc vat

($189.00) £189.00 inc vat
CROWNWHEEL + PINION 2.9 RATIO
CWP2-9

59 tooth crownwheel plus 20 tooth pinion making 2.95 ratio. A plus gears sold as a set only.

($157.50) £157.50 exc vat

($189.00) £189.00 inc vat
CROWNWHEEL + PINION 2.76 RATIO GEARS
CWP2-76

Crownwheel with 58 teeth and pinion gear with 21 teeth. Not supplied with bearings.

($157.50) £157.50 exc vat

($189.00) £189.00 inc vat
OUTPUT SHAFT FOR POT JOINT
DAM3114

Output drive shaft from the differential on Rod change type gearboxes,the teeth very rarely wear badly but the side cover bushes(2A3538)sometimes ruin the shaft causing those dreaded oil leaks from the seals in the output covers CHM85.

these...

($45.00) £45.00 exc vat

($54.00) £54.00 inc vat