FUEL LINE 5/16" METAL FOR COMPETITION 104"long
FP226

($36.08) £36.08 exc vat

($43.30) £43.30 inc vat

In stockIn stock
Easy bend copper 5/16"(8mm)fuel line 104"long for HIF38 CARB cars or upgrade use when using RTW506 red top pump or equivalents or injection etc.

($36.08) £36.08 exc vat

($43.30) £43.30 inc vat

In stockIn stock

Recommended usage 1 x FP226 to fit one mini.
Fuel Tanks and Pumps - Qty 1

People also bought products
PETROL TANK SENDER UNIT SALOON (1959-1964)
2A2163

Petrol tank sender unit for saloon models 1959 until 1964 screw on type, for Minis fitted with no voltage stabiliser.

($40.00) £40.00 exc vat

($48.00) £48.00 inc vat
HIF44 CARB REPAIR KIT WITH PLAIN THROTTLE DISC
CRK162

($79.01) £79.01 exc vat

($94.81) £94.81 inc vat
PETROL TANK STRAP RETAINING BOLT
13H7583

5/16" UNF THREAD 2 1/2" LONG bolt commonly used for 21A2838 petrol tank strap

($0.59) £0.59 exc vat

($0.71) £0.71 inc vat
CAPTIVE NUT FOR FUEL TANK STRAP BRACKET 1976-ON
346071A

5/16" UNF cage nut as fitted to CZH3241 tank bracket on cars fitted with a 7.5 Gallon fuel tank. Uses 13H7583 bolt

($0.69) £0.69 exc vat

($0.83) £0.83 inc vat
PETROL TANK FOR SPI CARS ONLY-NON GENUINE
WFE10401MS

7.5 gallon tank has both pump and sender unit holes for injection cars only. Some people use this tank for turbo applications however.

($192.00) £192.00 exc vat

($230.40) £230.40 inc vat
PETROL TANK FOR MPI CARS ONLY-NON GENUINE
WFE106090MS

MPI 7.5 gallon tank has both pump and sender unit holes. Some people use this tank for turbo applications. This tank has the shorter neck with restrictor for lead free fuel nozzles as required by Japan and Germany and uses the thinner neck seal [link...

($192.00) £192.00 exc vat

($230.40) £230.40 inc vat
PETROL TANK SALOON 7.5 GALLON 1974 UP TO INJECTION
ARP1043MS

Non Genuine, fits saloons from 1974 until the introduction of injection.

First fitted to 1275GT in 1974 with 12"wheels and all mini saloons from 1980 on

7.5 gallons or 34 litres capacity and the tank is retained by the single stra...

($200.00) £200.00 exc vat

($240.00) £240.00 inc vat
GENUINE MINISPARES FUEL FILLER NECK GROMMET
14A7057GENUINE

Genuine Mini Spares product. The seal that goes on the neck of petrol tanks as protection against water intrusion and to also to make the hole look neater, so replace them when they crack or shrink through heat. This is the original fatter type as us...

($7.24) £7.24 exc vat

($8.69) £8.69 inc vat
SPRING HOSE CLIP FOR FUEL/RADIATOR HOSE
UKC3803

Original 7/16" spring type hose clip as used on later cars (approx 1990 on) for some radiator hoses and fuel lines.

($0.95) £0.95 exc vat

($1.14) £1.14 inc vat
ALUMINIUM RACE FUEL TANK
MS80

Race spec aluminium fuel tank, foam filled 45 litre capacity, sight gauge, meets appendix K race regulations. Hand made in the UK!

($725.00) £725.00 exc vat

($870.00) £870.00 inc vat
BRACKET LEFT HAND PETROL TANK SUPPORT
14A6867

Support for L/H petrol tank.

($17.00) £17.00 exc vat

($20.40) £20.40 inc vat
VAN/ESTATE/PICK UP PETROL TANK FITTING KIT
21A291FK

Replacement screws and nylon inserts for the Van, Estate and Pick up petrol tanks.

($12.60) £12.60 exc vat

($15.12) £15.12 inc vat
MPi REPLACEMENT FUEL PUMP ONLY
WFX100812

The main cause of failure is water in the pump. This is caused by modern ethanol fuels. Be sure to clean the tank out before fitting and drive your mini more to avoid water build up.

Replacement pump only for the original WFX100810<...

($48.51) £48.51 exc vat

($58.21) £58.21 inc vat
PETROL HOSE 8MM (5/16") INJECTION RATED SOLD IN 1M...
LPH631

5/16" bore petrol hose for injection cars sold in metre lengths.

Resilient to heat,weather and suitable for ethanol in modern day fuels.100psi max.R9 spec.

($6.35) £6.35 exc vat

($7.62) £7.62 inc vat
PETROL TANK 5.5 GALLON (LEFT HAND)
ARA359

5.5 gallon left hand tank with twist in sender unit.

For all mini saloons from 1964 until 1980 except Elf and Hornet. Also except the 1275GT from 1974 which used the later 7.5 gallon tank which became standard fitment to all mini saloons fro...

($298.99) £298.99 exc vat

($358.79) £358.79 inc vat
FUEL UNION 1/4" 6mm 90degree 1/8" NPTF (SINGLE)
FPA9001

Used on Facet range of solid state and silver fuel pumps SS501/2/3 with 1/8" nptf thread size with 1/4" standard fuel line.

($3.76) £3.76 exc vat

($4.51) £4.51 inc vat
FUEL PIPE FROM FUEL FILTER ON MPI CARS FROM WD1695...
WKB10018L

Fuel pipe from the fuel filter to engine on mpi models from chassis no WD169574 when fuel filter GFE7057 is fitted.



Tube nut has 7 threads and the metal pipe is the same size with a flared end.

($30.80) £30.80 exc vat

($36.96) £36.96 inc vat
HOSE CLIP 8-12MM
GHC108012

Small hose clip for 1/4" fuel line (our part number PETROLPIPE)

($1.16) £1.16 exc vat

($1.39) £1.39 inc vat
PETROL TANK SUPPORT BRACKET R/H
21A1330

Support bracket for the R/H, genuine Heritage part, can also use our own bracket 21A1329.

($19.00) £19.00 exc vat

($22.80) £22.80 inc vat
BUTTERFLY / THROTTLE DISC HIF44 EXCEPT TURBO
WZX1414

Throttle disc only for HIF44-non turbo and if replacing the spindle there are 2 type, threaded one end only use WZX1127 for very early carbs 1980-81 only, but all later cars were threaded both ends use WZX1128

($30.09) £30.09 exc vat

($36.11) £36.11 inc vat