(¥0) £0.06 exc vat
(¥0) £0.07 inc vat
In stock
Also used to hold on MK1 grille moustache.
Fits in shaft of MK1/2 door handles to retain them in the locks.
(¥0) £0.06 exc vat
(¥0) £0.07 inc vat
In stockRecommended usage 1 x GFK2256 to fit one mini.
Retro grille to the Austin Mini Cooper S MK1 design. Has a full top slat which means the fitting of an internal bonnet lock kit.
Kit includes grille, surround, end whisher mouldings and fixing clips.
Morris Cooper full slat grille is with surround in chrome over brass to give a little longer life service. Made to fit the later genuine front panels better than the original this kit will require that you have an internal bonnet lock. This is everyb...
This is a complete moustache kit to fit all MK1 grilles to any genuine rover front panels. The fixing lugs on the 14A7781retro surround are deeper to fit into the recess formed on front panels. The bonnet moulding and its fitting platfor...
Morris Cooper grille with half top slat for external bonnet release. It is complete with chrome over brass grille surrounds as per original material and
modified to fit all later genuine panels.
Kit includes grille, surround, end wh...
Retro Grille to the Austin Mini Cooper and S MK1 design has a recess top slat which allows opening of bonnet as per originals. If you require a full top slat order 24A199KIT which requires the fitting of an internal bonnet lock kit.
...
Grille surround set, bonnet moulding and 2 side pieces plus chrome plastic seating strips and screws for all Mk2 grilles from 1968 to the last production models in 2000.
This kit includes the special shaped chrome plastic seating pieces for...
Austin Mk1 grille with half top slat for external bonnet release. It is complete with chrome over brass grille surround as per original material and
modified to fit all later genuine panels. Kit includes grille,surround, end whisher moulding...
Boot hinge gaskets and fittings for original type hinges
Clip to retain the speedo cable to the bulkhead on pre 82 cars approx. This clip is also used to hold the loom to the inner wing on some cars.
8 slot castle nut for disc brake CV joints. The extra slots make it easier to reach the factory torque setting.
Complete car set of stainless steel screws for the piano hinge type opening rear quarter light windows.
Engine mount bolt kit for manual cars, 1 kit requried per car.
Upper door moulding rivet for Cooper S door trim. For Mk1 usually 1 at front and 3 at back making 4 per side and on Mk2 there were 2 per end at bottom making 4 per side. This is the 10mm head rivet and not required on our own 14A9773/9774 trims that ...
Door capping screw for aftermarket door cappings such as our part number MSA0191.
5/16" UNF THREAD 2 1/2" LONG bolt commonly used for 21A2838 petrol tank strap
Washer for 17H2646ORIGINAL brake servo non return valve
Pop rivet for fixing the headlamp bowl to the wing. Great for MS14 metal bowl but be careful if using on plastic bowls
Wiper mounting kit for Mk1 Mini's (3 required per car). Each kit comes with a pin, nut, 2 washers and mounting rubber.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.