BOLT 1/4"x1" UNF SETSCREW
GFK5180

($0.10) £0.10 exc vat

($0.12) £0.12 inc vat

In stockIn stock

($0.10) £0.10 exc vat

($0.12) £0.12 inc vat

In stockIn stock

Recommended usage 1 x GFK5180 to fit one mini.
Gearbox Transmission - Qty 4
Water Pump, Pulleys & Ancillaries - Qty 4
Water Pump and thermostat - Pre 1996 Not MPI - Qty 4
Flywheel and Clutch - Qty 1
Gearbox Transmission Case - Qty 6
Gearbox Transmission Case 2 - Qty 2

Recommended products
WASHER PLAIN 1/4" x 1/2"
GFK1113

($0.08) £0.08 exc vat

($0.10) £0.10 inc vat
SPRING WASHER 1/4"
GFK1124

1/4" spring washer.

($0.07) £0.07 exc vat

($0.08) £0.08 inc vat
NUT NYLOC 1/4" UNF
GFK3321

($0.10) £0.10 exc vat

($0.12) £0.12 inc vat
NUT PLAIN 1/4" UNF
GFK3211

($0.07) £0.07 exc vat

($0.08) £0.08 inc vat
WASHER 1" REPAIR WASHER 1/4" HOLE(100)
GFK1133

($0.15) £0.15 exc vat

($0.18) £0.18 inc vat
Alternative products
CLUTCH ARM SETSCREW HZS407.THIN HEAD SCREW
SH604071

screw in the clutch case that the clutch lever adjusts against 1/4"unf 7/8"long

Also pulley to water pump on some models.

($0.33) £0.33 exc vat

($0.40) £0.40 inc vat
BOLT 1/4"x1.5" UNF
GFK5181

($0.13) £0.13 exc vat

($0.16) £0.16 inc vat
Kit products
SHOCK ABSORBER FRONT KIT FOR HYDROLASTIC CARS
C-AJJ3362

this kit contains kayaba 442001 dampers.

complete with brackets etc to fit to your hydrolastic mini. This was devised by special tuning abingdon to stop the wheels tramping and front to rear pitching of the cars. very worthwhile...

($90.78) £90.78 exc vat

($108.94) £108.94 inc vat
ENGINE TO GEARBOX NUT AND BOLT KIT
MSSK060

Complete nut, bolt and washer set for engine to gearbox only

($3.50) £3.50 exc vat

($4.20) £4.20 inc vat
FRONT HYDRO TO DRY CONVERSION KIT
C-AJJ3350

Front hydro to dry conversion kit less dampers owing to different customer requirements.

($176.45) £176.45 exc vat

($211.74) £211.74 inc vat
People also bought products
ENGINE MOUNT BOLT KIT FOR ALL MANUAL TYPES
21A1902FK

Engine mount bolt kit for manual cars, 1 kit requried per car.

($3.83) £3.83 exc vat

($4.60) £4.60 inc vat
MINI BOOT CABLE FITTING KIT INCLUDING SPACERS
14A6740FK

($4.50) £4.50 exc vat

($5.40) £5.40 inc vat
COMPETITION SUBFRAME FRONT TOWER BOLT 1976 ON
21A2596EVO

Lightweight drilled version of 21A2596. This bolt is drilled all the way through to allow easy adjustment of Hilos.

($18.00) £18.00 exc vat

($21.60) £21.60 inc vat
BOLT 3/8 x 3.5" UNF
BH606281

($0.54) £0.54 exc vat

($0.65) £0.65 inc vat
M8 X 18MM FLANGED HEAD BOLT
FS108185

M8 X 18MM FLANGED HEAD BOLT

($0.07) £0.07 exc vat

($0.08) £0.08 inc vat
PETROL TANK STRAP RETAINING BOLT
13H7583

5/16" UNF THREAD 2 1/2" LONG bolt commonly used for 21A2838 petrol tank strap

($0.59) £0.59 exc vat

($0.71) £0.71 inc vat
SETSCREW 5/16" UNF STAINLESS STEEL
GFK5184SS

Stainless steel version of GFK5184, worth keeping a few spare as they are one of the most common bolts fitted to the Mini.

($0.56) £0.56 exc vat

($0.67) £0.67 inc vat
BOLT M8X120MM
FB108241

Bolt for the top alternator bracket on mpi cars.

($1.18) £1.18 exc vat

($1.42) £1.42 inc vat
SETSCREW 5/16" UNF STAINLESS STEEL
GFK5185SS

Stainless steel version of GFK5185, worth keeping a few spare as they are one of the most common bolts fitted to the Mini.

($0.60) £0.60 exc vat

($0.72) £0.72 inc vat
SEAT BELT THREADED ANCHOR PLATE (65mm X 65mm)
681-4

FIA spec anchor plate for eye bolts, used when fitting harnesses. Sold individually, 7/16 UNF 65x65x3mm.

($1.60) £1.60 exc vat

($1.92) £1.92 inc vat
MACHINED SCREW FOR 8B12501METAL TO LENS M4x10
MSB2003

Screw for chrome metal number plate lamp on mk3 19790 on - You will have to drill the lens out to take M4 screw.

($0.10) £0.10 exc vat

($0.12) £0.12 inc vat
FLANGED BOLT FOR HEAT SHIELD M6x10( rad bolt )
FS106107

m6x10 bolt--ideal for radiators with metric fittings (6 required for rads)

original imperial radiator screws were SH604031 or PK type were ARA1117

($0.91) £0.91 exc vat

($1.09) £1.09 inc vat
BOLT 5/16"UNC 1.75"LONG FOR CLUTCH HOUSING
DAM7759

Clutch housing bolt to engine long 5/16" UNC 1.75" long Fitted ffrom 1985 for clutch housing instead of 22A152 stud

($2.00) £2.00 exc vat

($2.40) £2.40 inc vat
SCREW FOR DOOR LOCK MK3 SPECIAL CUTTING THREAD
ZCT410

Special thread cutting screw 1/4 UNF 1.25" (31mm) long.

Screw to hold the lock assembly on the door of MK3 cars with internal hinges and wind up windows. On new doors or for easy fitment use these special screws with cutting thread (3 sided ...

($0.92) £0.92 exc vat

($1.10) £1.10 inc vat
FLANGED BOLT 5/16" UNF 1.75" LONG. CLUTCH CASE TO ...
DAM7758

Clutch housing bolt to engine long 5/16" UNF 1.75" long with tuflock patch to secure. Earlier bolts less tuflock are {link]BH605141{/link}

($0.83) £0.83 exc vat

($1.00) £1.00 inc vat
SELF TAP SCREW No10 1" LONG
GFK2264

Self tap screw No10 for holding wiper motor strap to body and any other use.

($0.05) £0.05 exc vat

($0.06) £0.06 inc vat
CATALYST M10 BOLT METRIC FOR CAT FLANGE
FB110351

M10 metric flanged bolt 35mm long for catalytic converter. (4 required per unit)

($1.22) £1.22 exc vat

($1.46) £1.46 inc vat
WINGNUT FOR COOPER & S AIR FILTER
12G2705

Wing nut to secure the air filter box on Cooper & Cooper 'S' models.

($7.50) £7.50 exc vat

($9.00) £9.00 inc vat
FIXING KIT FOR ALLOY EXTERNAL DOOR HINGES
14A6818BOLT

New set of metric studs, bolts, nuts and washers as supplied with the alloy external hinge kit (PEASE NOTE: This kit is NOT suitable for the original hinges). The studs have allen key socket ends to help put them into the hinge easily without damage,...

($7.50) £7.50 exc vat

($9.00) £9.00 inc vat
SEAT BELT EYE BOLT PAIR
681/1

EYE BOLTS FOR 3 OR 4 POINT HARNESSES. 1 PAIR.

($4.59) £4.59 exc vat

($5.51) £5.51 inc vat