NUT NYLOC 3/8" UNF
GFK3323

£0.12 exc vat

£0.14 inc vat

In stockIn stock

£0.12 exc vat

£0.14 inc vat

In stockIn stock

Recommended usage 1 x GFK3323 to fit one mini.
Rod Change Gear Selectors and Speedo Drive - Qty 1
Front Hydrolastic Displacer Suspension ( Known as - Qty 2
Front Hydrolastic Displacer Suspension ( Known as - Qty 2
Rear Suspension Rubber Cone - Qty 2
Steering Rack - Qty 2
Gear Lever and Selector Mechanism - Qty 1
Rear Damper and Suspension - Qty 4
Steering racks - Qty 2
Front Subframe - Qty 2
Front Rubber Cone Spring Suspension ( Known as Dr - Qty 8
Front Rubber Cone Spring Suspension ( Known as Dr - Qty 2
Gearbox Selector Forks - Qty 1
Front Suspension - Qty 2
Front Suspension - Qty 2
Alternators and Starter - Qty 1

Recommended products
Alternative products
Kit products

this kit contains kayaba 442001 dampers.

complete with brackets etc to fit to your hydrolastic mini. This was devised by special tuning abingdon to stop the wheels tramping and front to rear pitching of the cars. very worthwhile...

Conversion kit when converting rear subframe from hydrolastic to dry, includes everything except dry subframe radius arms and dampers owing to different customer requirments.



*** Please note: Radius arms are NOT included in this pa...

Front hydro to dry conversion kit less dampers owing to different customer requirements.

This kit includes all hardware to fit suspension to your front subframe. Also includes front damper mounting hardware and lower arm pins.

People also bought products

Boot hinge gaskets and fittings for original type hinges

This kit includes all hardware to fit suspension to your front subframe. Also includes front damper mounting hardware and lower arm pins.

8 slot castle nut for disc brake CV joints. The extra slots make it easier to reach the factory torque setting.

Engine mount bolt kit for manual cars, 1 kit requried per car.

5/16" UNF cage nut as fitted to CZH3241 tank bracket on cars fitted with a 7.5 Gallon fuel tank. Uses 13H7583 bolt

Wiper mounting kit for Mk1 Mini's (3 required per car). Each kit comes with a pin, nut, 2 washers and mounting rubber.

5/16" UNF A2 Stainless Steel Plain nut, ideal for engine bay dress ups or nuts that you don't want going rusty!

A2 Stainless Steel 5/16" UNF Nyloc nut, ideal for engine bay dress ups or nuts that you don't want going rusty!

M6 metric lock nut -fits 14A6779ms bumper

Metric M6 PLAIN NUT.sold singly per item

Required for non genuine stainless steel and chrome bumpers.

Fits radiators with metric fittings such as ARP1110

METRIC FLANGED NUT AS USED ON ENGINE ANCILLARIES FROM 1990 ON

Metric flanged metric M6 nut as used on engine, air con units and heaters from 1990 on.

Plain half thickness half inch nut as used on our C-AJJ3365 arms and steering rack adjustment nut for track rod ends.

Wing nut to secure the air filter box on Cooper & Cooper 'S' models.

New set of metric studs, bolts, nuts and washers as supplied with the alloy external hinge kit (PEASE NOTE: This kit is NOT suitable for the original hinges). The studs have allen key socket ends to help put them into the hinge easily without damage,...

Original metric fixing nut for genuine Rover sportspack arches.

Multi purpose square plastic plug/nut for No8 screw size was used on many door fixings and fuse box to body.



Also suitable for Twin Point indicator fixings.