This plug fits the hole in the inner wing where the wiring for the wing side repeater lamp goes through the body on cars after 1986.
Cars with pre engaged starter,side repeater lamps on wings, dim dip unit pre Ocober 1988 production cars without servo and brake combined cylinders. R/H/D.
Original HAM4626 has pinkish brown resistance wire for ballast type coil...
Fits the first cars with pre engaged starter,side repeaters on wings R/H/D
but no dim/dip relay(pink relay box) --if you have the pink relay use HAM4626--
HAM4626 can of course be used for this and ignore extra wires for dim dip.
PVC wiring loom for MK1, floor starter with coil on dynamo and single speedo clock only. 1959-62 without temp gauge-to A2S7-197020- before temp gauge fitted.
Same loom in braided is 5L191.
Same loom but for cars with temp gauge in 3...
1000cc Mini and Cooper (not "S"), 4 wires to wiper motor.
Dynamo
Complete with rear loom.
For Cooper S MK3 with dynamos and 998cc deluxe minis with the speedo and two gauges dynamo type-for alternator type see 5L1331
Complete with rear loom.
MAIN WIRING LOOM 1969 TO 1976 MK3 998 MINI AND COOPER S. ALTERATOR/PVC COVERED.
Complete with rear loom for electronic fuel pump.
Basic spec is: centre speedo oval dash, single stalk, toggle or mk3 rocker switches, inertia starter, ...
MK1, 64-67, key start, dynamo; cloth covered and oil filter light. Very few cars still have a functioning oil light switch on the filter head so this loom is sold for cars without oil filter light switch and ignore extra wires.
This loom is...
PVC covered for Mk1 mini deluxe versions and Cooper with dynamo(not Cooper S)
Braided type only available for cars with alternator part, number 5L670
Braided type with dynamo is 5L503
deluxe versions have speedo plus 2 gaug...
Braided cloth wiring loom for Cooper S MK1 with alternator. See 5L518 for braided with dynamo.
Complete with rear loom.
Large grommet to fit 1"approx holes in bulkhead for items that need to be able to flex and move such as capillary tubes and oil pipes. 7/32" hole size.
The small hole will expand and is also used as wiring loom through bulkhead and battery c...
PVC covered loom for 1275GT models with alternator from 1970 to 1976. For dynamo version of this see AN127.
Basic spec is: side instrument pack, single stalk, MK3 rocker switches, round single speed wiper motor, manual washer pu...
Braided Wiring loom for MK1, floor starter with coil on dynamo and single speedo clock only. 1959-62 without temp gauge-to A2S7-197020- before temp gauge fitted.
The same loom in PVC is 5L322.
Same loom but for cars with temp gauge ...
Braided rear part loom ONLY for MK1 Minis without a rear heated screen.
For MK1 mini deluxe or Cooper Mk1 with alternator. Braided version
Complete with rear loom.
Wiring loom rear ONLY with wires for heated screen.
Same as 5L502 for MK1 cars except this has the heated screen wires as fitted only on late cars from C-A2S7 950597 on and K-A2S4 943557 on.
Braided BLACK cotton covering with yellow flashes,this complete loom fits MK2 Cooper S with alternator and 3 wires to wiper - pre wiper plug type.
Complete with rear loom.
PVC covered rear loom only for Mk2 with heated rear screen.
Can be fitted to MK3 front loom ( HAM2174 ).
In pvc tape covering as original for dynamo type Cooper S MK2 cars, 3 wires to wiper motor. Complete with rear loom.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.