Genuine gearbox oil strainer to gearbox internal case gasket and also used on the C-AHT54 special oil pick up pipe. One also sits on the outer plate held onto the gearbox outer casing by 2 screws.

Fits in place of the oil pick up retainer plate on the back of the gearbox this magnetic plug with filter collects metal debris from going back into the power unit but should be regularly cleaned. A non filter type of theis version is available as [l...

Fits in place of the oil pick up retainer plate on the back of the gearbox this magnetic plug filter collects metal debris from going back into the power unit but should be regularly cleaned. Also available as the ultimate is the same item with a bui...

Minispares centre own reconditioned helical tranny with all new ball bearings

throughout except under 2/3rd gear which are usually okay and very expensive, performance layshaft,special oil pick up pipe,diff pin etc.2.9-1 diff fitted .any fa...

New for 2023, special heavy duty 2nd and 3rd gears with laygear and 1st motion to match giving a quiet road box suitable for engines producing upto 125lbft of torque on naturally aspirated engines.



Ratios are:



1s...

Minispares centre own reconditioned helical tranny with all new ball bearings

throughout except under 1st,2/3rd gear which are usually okay and very expensive, performance layshaft,special oil pick up pipe,diff pin etc.3.4 diff fitted .any ...

This gearbox is identical to MSG05 except for a 3.2 final drive which effectively gives you a final drive ratio of 2.82 in 5th.

Do not come with input gear supplied.

Surcgharge on old unit £400+ VAT

Mini Spares 'Straight Cut Close Ratio 4-Speed gearboxes'



Mini Spares are proud to offer a new range of straight cut, 4-speed rod change gearboxes.



These gearboxes undergo a full rebuild, using new; bearings, sea...

This gearbox is identical to MSG05 except for a 3.1 final drive which effectively gives you a final drive ratio of 2.73 in 5th.

Does not come with input gear supplied.

Mini Spares 'Straight Cut Close Ratio 4-Speed gearboxes'



Mini Spares are proud to offer a new range of straight cut, 4-speed rod change gearboxes.



These gearboxes undergo a full rebuild, using new; bearings, sea...

This gearbox is identical to MSG04 except for a 3.1 final drive which effectively gives you a final drive ratio of 2.73 in 5th.

Do not come with input gear supplied.

Mini Spares Close ratio Evolution five speed "A" Plus Rod-change helical cut teeth gearbox has been in production since 1993 with phenomenal proven reliability. Do not use a quick shift gear lever with this gearbox

Suitable for 1275-1380cc(e...

New for 2023, special heavy duty 2nd and 3rd gears with laygear and 1st motion to match giving a quiet road box suitable for engines producing upto 125lbft of torque on naturally aspirated engines.



Ratios are:



1s...

New for 2023, special heavy duty 2nd and 3rd gears with laygear and 1st motion to match giving a quiet road box suitable for engines producing upto 125lbft of torque on naturally aspirated engines.



Ratios are:



1s...

Close ratio 4 speed helical gearbox using our C-STN48 gear kit.

1st gear ratio 2.583

2nd gear 1.644

3rd gera 1.250

New for 2023, special heavy duty 2nd and 3rd gears with laygear and 1st motion to match giving a quiet road box suitable for engines producing upto 125lbft of torque on naturally aspirated engines.



Ratios are:



1s...

Mini Spares best quality complete gasket and seal kit for engine block and gearbox,for all common engine types and sizes.



Also comes complete with Mini Spares Evolution clutch oil seal 13H2934MS, differential oil seals...

Genuine gearbox gasket for the large alloy end cover which also houses the speedo drive pinion for all years of mini. The small gasket on the alloy housing with 2 bolt holes is GUG705564GM and the small pear shaped speedo housing gasket ...

Lower differential housing paper gasket for old magic wand and remote type gearboxes, rod change gearboxes.

for the inspection plate on the front cover of the transmission where the speed cable goes to -it has 2 bolt holes cut out

Gearbox output shaft housing gasket for all minis except auto.

Sold singly 2 required per gearbox.

Gearbox gasket for the large alloy end cover which also houses the speedo drive pinion for all years of mini. The small gasket on the alloy housing with 2 bolt holes is GUG705564GM and the small pear shaped speedo housing gasket is [link...

Originally developed by Rover to cut down on warranty hourly costs on powertrain warranty repairs, by their main dealers.-Labour time allowed at Rover dealers for fitting this seal was 3.4 hours labour rate.

This is a special rigid seal and ...

Actually the concertina dust cover for the rod change oil seal to prevent road debris attacking the seal. See MSSK050 kit when undertaking this job.

Seal, Oil, flange type.

Often overlooked when doing gearbox rebuilds this seal is very important as it sits in the very bottom of the case and is the source of irritating oil leaks.

The large round metal plug in the bottom of the gearbox is the pivot pin for all th...