CLUTCH ARM SETSCREW HZS407.THIN HEAD SCREW
SH604071

($0.33) £0.33 exc vat

($0.40) £0.40 inc vat

In stockIn stock
screw in the clutch case that the clutch lever adjusts against 1/4"unf 7/8"long

Also pulley to water pump on some models.

($0.33) £0.33 exc vat

($0.40) £0.40 inc vat

In stockIn stock

Recommended usage 1 x SH604071 to fit one mini.
Clutch Housing - Qty 1
Rear Doors and Tailgate - Qty 8

Recommended products
NUT PLAIN 1/4" UNF
GFK3211

($0.07) £0.07 exc vat

($0.08) £0.08 inc vat
Alternative products
BUMPER HANDLE BAR TO OVERIDER SHORT BOLT 1/4" x 3/...
GFK5179

Fixes fan blade to water pump and corner bars to overider on deluxe bumpers. Also used for locating plate AHU2379.

($0.13) £0.13 exc vat

($0.16) £0.16 inc vat
People also bought products
ENGINE MOUNT BOLT KIT FOR ALL MANUAL TYPES
21A1902FK

Engine mount bolt kit for manual cars, 1 kit requried per car.

($3.83) £3.83 exc vat

($4.60) £4.60 inc vat
MINI BOOT CABLE FITTING KIT INCLUDING SPACERS
14A6740FK

($4.50) £4.50 exc vat

($5.40) £5.40 inc vat
BOLT 3/8 x 3.5" UNF
BH606281

($0.54) £0.54 exc vat

($0.65) £0.65 inc vat
PETROL TANK STRAP RETAINING BOLT
13H7583

5/16" UNF THREAD 2 1/2" LONG bolt commonly used for 21A2838 petrol tank strap

($0.59) £0.59 exc vat

($0.71) £0.71 inc vat
SETSCREW 5/16" UNF STAINLESS STEEL
GFK5184SS

Stainless steel version of GFK5184, worth keeping a few spare as they are one of the most common bolts fitted to the Mini.

($0.56) £0.56 exc vat

($0.67) £0.67 inc vat
CLUTCH ARM FITTING KIT FOR 22A2204
22A2204FK

Fitting kit for 22A2204MS clutch arm with a square end. The plate to fit on the end of the arm in this kit is 20mm wide at both ends see 2A3601MS but earlier arms used 25mm down to 20mm wide see 2A3601.
<...

($15.92) £15.92 exc vat

($19.10) £19.10 inc vat
SETSCREW 5/16" UNF STAINLESS STEEL
GFK5185SS

Stainless steel version of GFK5185, worth keeping a few spare as they are one of the most common bolts fitted to the Mini.

($0.60) £0.60 exc vat

($0.72) £0.72 inc vat
MACHINED SCREW FOR 8B12501METAL TO LENS M4x10
MSB2003

Screw for chrome metal number plate lamp on mk3 19790 on - You will have to drill the lens out to take M4 screw.

($0.10) £0.10 exc vat

($0.12) £0.12 inc vat
FLANGED BOLT FOR HEAT SHIELD M6x10( rad bolt )
FS106107

m6x10 bolt--ideal for radiators with metric fittings (6 required for rads)

original imperial radiator screws were SH604031 or PK type were ARA1117

($0.91) £0.91 exc vat

($1.09) £1.09 inc vat
BOLT 5/16"UNC 1.75"LONG FOR CLUTCH HOUSING
DAM7759

Clutch housing bolt to engine long 5/16" UNC 1.75" long Fitted ffrom 1985 for clutch housing instead of 22A152 stud

($2.00) £2.00 exc vat

($2.40) £2.40 inc vat
CLUTCH RETURN SPRING ANCHOR FOR MINISPARES LEVER A...
2A3601MS

Plate on the end of the PRE A plus long type clutch arm 22A2204MS to hold the return spring 1G5999. The clevis pin to hold this on the arm is CLZ518--this is the square type but for earlier tapered type Rover ar...

($4.28) £4.28 exc vat

($5.14) £5.14 inc vat
SCREW FOR DOOR LOCK MK3 SPECIAL CUTTING THREAD
ZCT410

Special thread cutting screw 1/4 UNF 1.25" (31mm) long.

Screw to hold the lock assembly on the door of MK3 cars with internal hinges and wind up windows. On new doors or for easy fitment use these special screws with cutting thread (3 sided ...

($0.92) £0.92 exc vat

($1.10) £1.10 inc vat
FLANGED BOLT 5/16" UNF 1.75" LONG. CLUTCH CASE TO ...
DAM7758

Clutch housing bolt to engine long 5/16" UNF 1.75" long with tuflock patch to secure. Earlier bolts less tuflock are {link]BH605141{/link}

($0.83) £0.83 exc vat

($1.00) £1.00 inc vat
FLYWHEEL CASING BOLT WITH THREADLOCK 5/16unc x 1.0...
DAM7756

Flanged head short UNC 5.16" BOLT for flywheel casing 1.0625"long it was used as an alternative to DAM7755 which was only 1" Long with tuflock patch to secure-this will be discontinued by Rover when current stocks are gone.

($0.87) £0.87 exc vat

($1.04) £1.04 inc vat
SELF TAP SCREW No10 1" LONG
GFK2264

Self tap screw No10 for holding wiper motor strap to body and any other use.

($0.05) £0.05 exc vat

($0.06) £0.06 inc vat
CATALYST M10 BOLT METRIC FOR CAT FLANGE
FB110351

M10 metric flanged bolt 35mm long for catalytic converter. (4 required per unit)

($1.22) £1.22 exc vat

($1.46) £1.46 inc vat
WINGNUT FOR COOPER & S AIR FILTER
12G2705

Wing nut to secure the air filter box on Cooper & Cooper 'S' models.

($7.50) £7.50 exc vat

($9.00) £9.00 inc vat
CLUTCH OIL SEAL MINISPARES PERFORMANCE USE TYPE.
13H2934MS

Introduced for competition engines where the increased rev limits or temperature can cause the LUF10005 or 13H2934 to leak, this fits all minis except automatic. This is Mini Spares copy of the original gaco seal and is iden...

($3.55) £3.55 exc vat

($4.26) £4.26 inc vat
FIXING KIT FOR ALLOY EXTERNAL DOOR HINGES
14A6818BOLT

New set of metric studs, bolts, nuts and washers as supplied with the alloy external hinge kit (PEASE NOTE: This kit is NOT suitable for the original hinges). The studs have allen key socket ends to help put them into the hinge easily without damage,...

($7.50) £7.50 exc vat

($9.00) £9.00 inc vat
SEAT BELT EYE BOLT PAIR
681/1

EYE BOLTS FOR 3 OR 4 POINT HARNESSES. 1 PAIR.

($4.59) £4.59 exc vat

($5.51) £5.51 inc vat