WASHER PLAIN 1/4" x 1/2"

GFK1113

($0.08) £0.08 exc vat

($0.10) £0.10 inc vat

In stock

($0.08) £0.08 exc vat

($0.10) £0.10 inc vat

In stock

Recommended usage As Required x GFK1113 to fit one mini.

Timing Cover & Tappet Inspection Cover - Qty 6

Rod Change Gear Selectors and Speedo Drive - Qty 1

Timing, side plate and rocker covers - Qty 6

Gearbox Transmission Case - Qty 10

Gearbox Transmission Case 2 - Qty 2

Radiators pre 1996 - Qty 2

Spot and fog lamps - Qty 2

Windscreen wipers and wash - Qty 2

Speedo cable and fittings, clock and gauges - Qty A/R

Rear Doors and Tailgate - Qty 8

Rear Doors and Tailgate - Qty 2

Bootlid - Qty 8

Bumpers and Number Plates - Qty 4

Gearbox Selector Forks - Qty 1

Front Door - Sliding window type - Qty 2

Battery fittings, cables and main looms - Qty 2

Recommended products

BUMPER HANDLE BAR TO OVERIDER SHORT BOLT 1/4" x 3/...

GFK5179

Fixes fan blade to water pump and corner bars to overider on deluxe bumpers. Also used for locating plate AHU2379.

($0.13) £0.13 exc vat

($0.16) £0.16 inc vat

NUT PLAIN 1/4" UNF

GFK3211

($0.07) £0.07 exc vat

($0.08) £0.08 inc vat

Alternative products

WASHER 1" REPAIR WASHER 1/4" HOLE(100)

GFK1133

($0.15) £0.15 exc vat

($0.18) £0.18 inc vat

Kit products

OVERIDER FITTING KIT FOR MK1

MSSK010

Car set of fixings to hold on the Deluxe type overiders and corner bars, complete with sealing rubber to bumper and spacers.

If you have standard overiders see kit MSSK011.

($12.44) £12.44 exc vat

($14.93) £14.93 inc vat

TWIN CARB LINKAGE KIT

MSSK009

This fitting kit suits all later day 1.25" and 1.5" twin carb set ups where the balance rods between the carbs required are equal length (2.25"), some early carbs had the balance bar with a triangular plate that were a shorter length. The kit has the...

($26.23) £26.23 exc vat

($31.48) £31.48 inc vat

LINKAGE KIT FOR MINISPARES WEBER INLET MANIFOLD

LINKAGE001

This is the kit supplied with our C-AHT772, C-AHT773 & C-AHT774 range of alloy inlet manifolds for the weber.

($33.18) £33.18 exc vat

($39.82) £39.82 inc vat

TWIN HS4 CARBURETTOR KIT - LESS AIR FILTERS

FZX3054

Not Built up= A Complete kit of HS4 CARBS/ MANIFOLD/LINKAGE LESS AIR CLEANER

($1,159.23) £1.159.23 exc vat

($1,391.08) £1.391.08 inc vat

TWIN HS2 CARBURETTOR KIT - LESS A/C

FZX3052

Not built up-A matching pair of HS2 twin carbs with polished dashpot covers plus original type twin HS2 linkage kit, inlet manifold but less air cleaners etc.

The UNC bolt holding the abutment bracket on the inlet m...

($1,146.05) £1.146.05 exc vat

($1,375.26) £1.375.26 inc vat

BONNET GAS STRUT KIT

MSA5000

A kit of everything needed to update your mini to have Gas struts fitted to the bonnet. Comes complete with fitting instructions. Illiminates the need for the standard bonnet prop, making engine bay access easier. Not suitable for mini clubman.

($37.50) £37.50 exc vat

($45.00) £45.00 inc vat

TWIN HS2 CARBURETTOR KIT WITH S/STEEL HEATSHIELD

FZX3052A

Not built up-A matching pair of HS2 twin carbs with polished dashpot covers and stainless steel heatshields plus original type twin HS2 linkage kit, inlet manifold but less air cleaners etc.

The UNC bolt holding the...

($1,147.79) £1.147.79 exc vat

($1,377.35) £1.377.35 inc vat

ENGINE TO GEARBOX NUT AND BOLT KIT

MSSK060

Complete nut, bolt and washer set for engine to gearbox only

($3.50) £3.50 exc vat

($4.20) £4.20 inc vat

COMPONENTS FOR C-AJJ4009

4009KIT

($0.00) £0.00 exc vat

($0.00) £0.00 inc vat

DOOR HINGE FITTING KIT COMPLETE MK3 ON

MSSK017FK

MK3 door hinge fitting kit for all internal hinged doors. (hinges not included)

($18.09) £18.09 exc vat

($21.71) £21.71 inc vat

TIMING COVER AND FRONT PLATE FITTING KIT

MSSK063

Timing cover front plate and tensioner plate bolt and washer kit. Comes with all parts to fit the cover except for the counter sunk screws if fitting a duplex kit (our duplex kits all come with these).

($8.00) £8.00 exc vat

($9.60) £9.60 inc vat

BATTERY BAR AND FITTING KIT FOR PRE 1990 MODELS

HAM2457FK

Battery bar and fitting kit for all pre 1990 cars whcih had the shorter battery bolts.

($25.65) £25.65 exc vat

($30.78) £30.78 inc vat

BATTERY BAR AND FITTING KIT FOR 1990 ON MODELS

HAM2457FKL

Battery bar and fitting kit for all post 1990 cars whcih had the longer battery bolts.

($30.08) £30.08 exc vat

($36.10) £36.10 inc vat

BOOT HINGE FITTING KIT

8B12602FK

Boot hinge gaskets and fittings for original type hinges

($3.69) £3.69 exc vat

($4.43) £4.43 inc vat

People also bought products

BOOT HINGE FITTING KIT

8B12602FK

Boot hinge gaskets and fittings for original type hinges

($3.69) £3.69 exc vat

($4.43) £4.43 inc vat

FRONT SUBFRAME ANCILLARY FIXINGS KIT

MSSK065

This kit includes all hardware to fit suspension to your front subframe. Also includes front damper mounting hardware and lower arm pins.

($33.30) £33.30 exc vat

($39.96) £39.96 inc vat

SPRING WASHER

WL700101

($0.06) £0.06 exc vat

($0.07) £0.07 inc vat

STARLOCK WASHER FOR MK3 DOOR HANDLE SCREW

WE702101

($0.08) £0.08 exc vat

($0.10) £0.10 inc vat

WASHER FOR BRAKE SERVO NON RETURN VALVE

11D5070

Washer for 17H2646ORIGINAL brake servo non return valve

($0.70) £0.70 exc vat

($0.84) £0.84 inc vat

WASHER 5/16" STAINLESS STEEL FLAT WASHER

GFK1114SS

($0.13) £0.13 exc vat

($0.16) £0.16 inc vat

SHAKEPROOF 3/16" WASHER

GHF320

Shakeproof star washer 3/16"unf sold individually-order quantity as required

($0.10) £0.10 exc vat

($0.12) £0.12 inc vat

WASHER PLAIN 3/16" 2bA x 3/8" OD FOR C-AJJ3381 BON...

WA1090

Plain washer 3/16" or 2BA.

($0.08) £0.08 exc vat

($0.10) £0.10 inc vat

SPRING WASHER 3/16"

GFK1123

SPRING WASHER 3/16" and 2BA.

($0.10) £0.10 exc vat

($0.12) £0.12 inc vat

WASHER FOR AIR FILTER BOLT

12A1437

Fibre washer to go under 12A1436 metal washer on the twin HS2 carb air cleaner. One required for HS4--sold singly order as required

($0.37) £0.37 exc vat

($0.44) £0.44 inc vat

OIL PRESSURE RELEASE VALVE COPPER WASHER

6K431

The oil pressure relief valve consists of an aluminum plunger with a heavy spring behind it. Access is through the 15/16" domed cap nut beside the dizzy. Once this nut is removed the spring will be visible. The plunger is beneath the spring and will ...

($0.36) £0.36 exc vat

($0.43) £0.43 inc vat

FIXING KIT FOR ALLOY EXTERNAL DOOR HINGES

14A6818BOLT

New set of metric studs, bolts, nuts and washers as supplied with the alloy external hinge kit (PEASE NOTE: This kit is NOT suitable for the original hinges). The studs have allen key socket ends to help put them into the hinge easily without damage,...

($7.50) £7.50 exc vat

($9.00) £9.00 inc vat

SHAKEPROOF WASHER 1/4"UNF