WASHER PLAIN 1/4" x 1/2"

($0.08) £0.08 exc vat

($0.10) £0.10 inc vat

SPRING WASHER 1/4"

GFK1124

1/4" spring washer.

($0.07) £0.07 exc vat

($0.08) £0.08 inc vat

NUT NYLOC 1/4" UNF

GFK3321

($0.10) £0.10 exc vat

($0.12) £0.12 inc vat

BUMPER KIT MK1 PAIR PRE96

MS25

Genuine Mini Spares product-of which, some parts were supplied to Rover.

Stainless steel automotive grade unlike the poor looking chrome set up imported by some and sold cheaply. The "Deluxe" models of all Minis included bumpers with these ...

($268.57) £268.57 exc vat

($322.28) £322.28 inc vat

TWIN CARB LINKAGE KIT

MSSK009

This fitting kit suits all later day 1.25" and 1.5" twin carb set ups where the balance rods between the carbs required are equal length (2.25"), some early carbs had the balance bar with a triangular plate that were a shorter length. The kit has the...

($26.23) £26.23 exc vat

($31.48) £31.48 inc vat

OIL PRESSURE REGULATOR KIT WITH BLUE ANODISED KNOB

HPS4BLUE

This kit includes a new oil galery plug with an adjustable knob and a washer which is used as a spring seat in the plug against the relief spring. This makes a playform for the adjuster bolt to adjust the engine oil pressure. Winding the knob in incr...

($13.36) £13.36 exc vat

($16.03) £16.03 inc vat

OIL PRESSURE REGULATOR KIT WITH CHROME KNOB

HPS4

This kit includes a new oil galery plug with an adjustable knob and a washer which is used as a spring seat in the plug against the relief spring. This makes a playform for the adjuster bolt to adjust the engine oil pressure. Winding the knob in incr...

($15.65) £15.65 exc vat

($18.78) £18.78 inc vat

TWIN HS4 CARBURETTOR KIT - LESS AIR FILTERS

FZX3054

Not Built up= A Complete kit of HS4 CARBS/ MANIFOLD/LINKAGE LESS AIR CLEANER

($1,159.23) £1.159.23 exc vat

($1,391.08) £1.391.08 inc vat

OIL PRESSURE REGULATOR KIT WITH ALLOY KNOB

HPS4ALLOY

This kit includes a new oil galery plug with an adjustable knob and a washer which is used as a spring seat in the plug against the relief spring. This makes a playform for the adjuster bolt to adjust the engine oil pressure. Winding the knob in incr...

($13.37) £13.37 exc vat

($16.04) £16.04 inc vat

TWIN HS2 CARBURETTOR KIT - LESS A/C

FZX3052

Not built up-A matching pair of HS2 twin carbs with polished dashpot covers plus original type twin HS2 linkage kit, inlet manifold but less air cleaners etc.

The UNC bolt holding the abutment bracket on the inlet m...

($1,146.05) £1.146.05 exc vat

($1,375.26) £1.375.26 inc vat

QUICK RELEASE BONNET HINGE PR MK3 ONWARDS

MSSK019

Quick Release Bonnet Hinges , MK3.one pair

Available for MK3 onwards Minis only. The MK3 Mini has hinges mounted differently from earlier models, these allow the bonnet to be quickly lifted off the car. If you've ever banged your head or cri...

($41.23) £41.23 exc vat

($49.48) £49.48 inc vat

OIL PRESSURE REGULATOR KIT WITH RED ANODISED KNOB

HPS4RED

This kit includes a new oil galery plug with an adjustable knob and a washer which is used as a spring seat in the plug against the relief spring. This makes a playform for the adjuster bolt to adjust the engine oil pressure. Winding the knob in incr...

($13.34) £13.34 exc vat

($16.01) £16.01 inc vat

TWIN HS2 CARBURETTOR KIT WITH S/STEEL HEATSHIELD

FZX3052A

Not built up-A matching pair of HS2 twin carbs with polished dashpot covers and stainless steel heatshields plus original type twin HS2 linkage kit, inlet manifold but less air cleaners etc.

The UNC bolt holding the...

($1,147.79) £1.147.79 exc vat

($1,377.35) £1.377.35 inc vat

ENGINE TO GEARBOX NUT AND BOLT KIT

MSSK060

Complete nut, bolt and washer set for engine to gearbox only

($3.50) £3.50 exc vat

($4.20) £4.20 inc vat

CYLINDER HEAD ANCILLARY STUD AND NUT KIT PRE 1990

MSSK061

Complete stud, nut and washer kit for the cylinder head ancillaries. Kit contains parts to retain the following:

Inlet/Exhaust manifold to head, studs/nuts/washers

Thermostat housing (no sandwich plate) studs/nuts/washers

H...

($14.00) £14.00 exc vat

($16.80) £16.80 inc vat

MK1/2 DOOR CHECK STRAP FITTING KIT

ALE1221FK

Complete fitting kit for the door check straps on all Minis fitted with external hinges.

($29.52) £29.52 exc vat

($35.42) £35.42 inc vat

CYLINDER HEAD HEATER TAP FITTING KIT

ADU9102FK

Fitting kit comprising of studs, nuts, plain washers, spring washers and a gasket

($1.60) £1.60 exc vat

($1.92) £1.92 inc vat

FRONT SUBFRAME ANCILLARY FIXINGS KIT

MSSK065

This kit includes all hardware to fit suspension to your front subframe. Also includes front damper mounting hardware and lower arm pins.

($33.30) £33.30 exc vat

($39.96) £39.96 inc vat

BOOT HINGE FITTING KIT

8B12602FK

Boot hinge gaskets and fittings for original type hinges

($3.69) £3.69 exc vat

($4.43) £4.43 inc vat

BOOT HINGE FITTING KIT

8B12602FK

Boot hinge gaskets and fittings for original type hinges

($3.69) £3.69 exc vat

($4.43) £4.43 inc vat

FRONT SUBFRAME ANCILLARY FIXINGS KIT

MSSK065

This kit includes all hardware to fit suspension to your front subframe. Also includes front damper mounting hardware and lower arm pins.

($33.30) £33.30 exc vat

($39.96) £39.96 inc vat

UPRATED FRONT DISC BRAKE HUB NUT

BTA249EVO

8 slot castle nut for disc brake CV joints. The extra slots make it easier to reach the factory torque setting.

($11.20) £11.20 exc vat

($13.44) £13.44 inc vat

ENGINE MOUNT BOLT KIT FOR ALL MANUAL TYPES

21A1902FK

Engine mount bolt kit for manual cars, 1 kit requried per car.

($3.83) £3.83 exc vat

($4.60) £4.60 inc vat

MINI BOOT CABLE FITTING KIT INCLUDING SPACERS

14A6740FK

($4.50) £4.50 exc vat

($5.40) £5.40 inc vat

CAPTIVE NUT FOR FUEL TANK STRAP BRACKET 1976-ON

346071A

5/16" UNF cage nut as fitted to CZH3241 tank bracket on cars fitted with a 7.5 Gallon fuel tank. Uses 13H7583 bolt

($0.69) £0.69 exc vat

($0.83) £0.83 inc vat

Mk1 WIPER MOTOR MOUNTS (THREE REQUIRED)

17H5431

Wiper mounting kit for Mk1 Mini's (3 required per car). Each kit comes with a pin, nut, 2 washers and mounting rubber.

($2.50) £2.50 exc vat

($3.00) £3.00 inc vat

NUT PLAIN 5/16" UNF STAINLESS STEEL

GFK3212SS

5/16" UNF A2 Stainless Steel Plain nut, ideal for engine bay dress ups or nuts that you don't want going rusty!

($0.29) £0.29 exc vat

($0.35) £0.35 inc vat

NUT NYLOC 5/16" STAINLESS STEEL UNF

GFK3322SS

A2 Stainless Steel 5/16" UNF Nyloc nut, ideal for engine bay dress ups or nuts that you don't want going rusty!

($0.27) £0.27 exc vat

($0.32) £0.32 inc vat

NUT NYLOC 6mm METRIC M6

GFK3391

M6 metric lock nut -fits 14A6779ms bumper

($0.26) £0.26 exc vat

($0.31) £0.31 inc vat

5/16 UNF STAINLESS STEEL FLANGED NUT

FN605041SS

fits thermostat housing and manifold

($2.00) £2.00 exc vat

($2.40) £2.40 inc vat

PLAIN NUT 6mm METRIC M6

FS106047

Metric M6 PLAIN NUT.sold singly per item

Required for non genuine stainless steel and chrome bumpers.

Fits radiators with metric fittings such as ARP1110

($0.06) £0.06 exc vat

($0.07) £0.07 inc vat

NUT METRIC FLANGED M8

FN108047

METRIC FLANGED NUT AS USED ON ENGINE ANCILLARIES FROM 1990 ON

($0.55) £0.55 exc vat

($0.66) £0.66 inc vat

FLANGED M6 METRIC NUT

FN106047

Metric flanged metric M6 nut as used on engine, air con units and heaters from 1990 on.

($0.26) £0.26 exc vat

($0.31) £0.31 inc vat

METRIC NUT FLANGED M8 now FN108047

FN108041

METRIC M8 nut for holding bolt on spotlamp brackets on SPI/MPI plus other parts

($0.20) £0.20 exc vat

($0.24) £0.24 inc vat

NUT PLAIN 1/2 INCH UNF HALF NUT

NT608041

Plain half thickness half inch nut as used on our C-AJJ3365 arms and steering rack adjustment nut for track rod ends.

($0.16) £0.16 exc vat

($0.19) £0.19 inc vat

WINGNUT FOR COOPER & S AIR FILTER

12G2705

Wing nut to secure the air filter box on Cooper & Cooper 'S' models.

($7.50) £7.50 exc vat

($9.00) £9.00 inc vat

FIXING KIT FOR ALLOY EXTERNAL DOOR HINGES

14A6818BOLT

New set of metric studs, bolts, nuts and washers as supplied with the alloy external hinge kit (PEASE NOTE: This kit is NOT suitable for the original hinges). The studs have allen key socket ends to help put them into the hinge easily without damage,...

($7.50) £7.50 exc vat

($9.00) £9.00 inc vat

SPORTSPACK WHEEL ARCH FLANGED FIXING NUT

FN105047

Original metric fixing nut for genuine Rover sportspack arches.

($0.28) £0.28 exc vat

($0.34) £0.34 inc vat

PLASTIC NUT ON DOOR FIXINGS

GFK3428

Multi purpose square plastic plug/nut for No8 screw size was used on many door fixings and fuse box to body.

Also suitable for Twin Point indicator fixings.

($0.24) £0.24 exc vat

($0.29) £0.29 inc vat