($48.00) £48.00 exc vat
($57.60) £57.60 inc vat
In stock
SPI overseas 3-2 ratio diff.
BEWARE-there is also another smaller worm 7 tooth spindle DAM6028 @21.37mm wide(21.1 WORN).
Beware also of red or blue colour plastic pinions from Metro boxes which were (21mm diameter)
SO NOTE-TXF10004 and TXD10006 were a special sized pairing.
Used in 3.2 diff ratio SPI gearboxes which were different to metro equivalents which had 13" wheels but used.
See AKM2 parts list page 45 for full chart
-All of the late type drive pinions were at least £36-00 new, jan 2000
you can use DAM6028 7 tooth and 22G2024 red 18 tooth for this 3.2 ratio combination with 12"wheels.
Plastic worm gears used on production minis.
15 teeth TXD10004 black worm special size
16 teeth DAM2905 green worm
17 teeth 22A1881 clear/white worm
18 teeth TXD10006 grey worm special size
($48.00) £48.00 exc vat
($57.60) £57.60 inc vat
In stockRecommended usage 1 x TXD10006 to fit one mini.
Genuine Mini Spares product, 2nd gear 4 synchro Pre A Plus-26 teeth
If you are about to undertake a gearbox strip down and you are using an old Haynes manual beware. When locking the gearbox into 2 gears to undo the large mainshaft and Ist m...
Every 4 synchro gearbox had a straight cut first gear as standard.
This one has 31 teeth and beware complete straight cut race gears sets use a 29 different tooth count.
4 synchro close ratio helical gear kit for pre A+ gearboxes using an 18mm A+ mainshaft.
Contains 1st motion shaft for larger 18mm mainshaft(A Plus) but with original 22G1040 pre plus laygear which uses a single step layshaft. Ca...
31 teeth Idler Gear, with one shaft longer than other as per last Rover design modification.If the Mini drive train has a weak link, it's the connection between the engine and the transmission! The idler gear often takes the abuse caused by wear and/...
Genuine new 6 tooth speedo drive spindle that mated with 17 tooth speed pinion 22A1881 on cars with 10" wheels before 1980 plus any year 1275GT. Also 12"wheel cars with 3.44 final drive 1984 on. On the Metro mini this was used with 17 an...
Input Gear 4-synchro gear.24 teeth
can be used on 3 synchro but the stem part is shorter so you will need to use a spacer by cutting up your old 3 synchro input gear to act as a spacer.
USED yellow colour coded 7 tooth splined speedo drive (23.4mm diameter worm)that fits in the gearbox to drive the TXD10004 15 tooth pinion that the speedo cable fits on and drives. Different helical pitch to other 7 tooth drive pinions.S...
UK MADE third and fourth synchronising hub for all 4 synchromesh mini gearboxes
to the last drawings and specifications
This is the 1st/2nd gear complete inner and outer hub assembly for all 4 synchromesh gearboxes. 33 teeth outer track
IKO idler gear bearing with special rollers for allowing movement on late type idler gears. The idler gears for twin point cars were also made from clean steel as an upgrade from 1996 on. This special bearing replaces the cheaper inferior earlier bea...
USED yellow colour coded 7 tooth splined speedo drive (23.4mm diameter worm)that fits in the gearbox to drive the TXD10004 15 tooth pinion that the speedo cable fits on and drives. Different helical pitch to other 7 tooth drive pinions.S...
:USED: Speedo cable drive pinion in the gearbox with 17 teeth, it was used with a 6 tooth drive spindle on all 10" wheel cars pre 1980.
Either brown or plain white sort of colour about 20.50mm to 21.12mm in diameter and very similar to [lin...
:Used: (secondhand) 5 tooth drive spindle mainly used on Metro range but includes ERA turbo mini with 3.2 final drive using 16 tooth plastic pinion.
Obsolete new but offered "used" in case a ratio change is required. The only drive spindle ...
USED 6 teeth speedo drive spindle that mated with 17 tooth speed pinion 22A1881 on cars with 10" wheels before 1980 plus any year 1275GT. Also 12"wheel cars with 3.44 final drive 1984 on. On the Metro mini this was used with 17 and 18 te...
For all rod change gearbox mechanism housings, this as un uprated poly bush replacement for the standard rubber bonded mount
Kit which enables you to fit a rod change gearbox to an earlier round tunnel.
Secondhand (used unit)only. This sits under the 28G251(DAM8488) alloy housing where the speedo cable connects to on the gearbox and the speedo drive pinion slots through this.Obsolete from Rover we are offering these old used units in ca...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.