GEAR LEVER ANTI RATTLE BUTTON
22G158

($3.53) £3.53 exc vat

($4.24) £4.24 inc vat

In stockIn stock
Gear lever button for bottom of gear lever in early remote change cars 1961-64.

($3.53) £3.53 exc vat

($4.24) £4.24 inc vat

In stockIn stock

Recommended usage 1 x 22G158 to fit one mini.
Gear Change Up to 1972 Not Rod Change - Qty 1

People also bought products
ROD CHANGE GEAR SELECTOR POLY MOUNT
22G2205POLY

For all rod change gearbox mechanism housings, this as un uprated poly bush replacement for the standard rubber bonded mount

($3.98) £3.98 exc vat

($4.78) £4.78 inc vat
GEAR LEVER BUSH FLANGE
22G292

($5.63) £5.63 exc vat

($6.76) £6.76 inc vat
CHROME ROD CHANGE GEAR LEVER
22A1932CHROME

Just because you have a rod-change gearbox doesn't mean you're immune from gearlever vibration. The ball on the end of the lever wears and is not seperately replaceable; replacing the lever is the answer.

($96.00) £96.00 exc vat

($115.20) £115.20 inc vat
GEARCHANGE MOUNTING ROD CHANGE
22G2205

Oversize cotton reel type mounting, sold singly 2 of these are required on the metal bracket that holds up the rod change gear linkage.

($2.50) £2.50 exc vat

($3.00) £3.00 inc vat
ROD CHANGE GEAR LINKAGE ROLL PIN
RPS1416

This pin joins the gear change rod to the selector rod, behind the diff housing

case and is usually easier to remove when reverse is selected.In reverse gear the angle is easier for removal. This is a great time to fit the Mini Spares slick ...

($0.90) £0.90 exc vat

($1.08) £1.08 inc vat
LARGE GROMMET FOR REMOTE HOUSING
22A271

This large rubber plug fits in the end of the remote control housing side enabling grease up of linkage etcetera.

($3.90) £3.90 exc vat

($4.68) £4.68 inc vat
DIFF OUTPUT SHAFT OIL SEAL IN VITON
ADU5738VITON

Upgraded Viton version of ADU5738. Drive shaft oil seal or diff output shaft oil seal for all Mini's except Cooper S and early Automatics. 2 required per gearbox.

($3.23) £3.23 exc vat

($3.88) £3.88 inc vat
PRIMARY GEAR BACKING RING GENUINE
88G549GENUINE

Genuine Rover spacer that fits up against the primary gear on the crankshaft and held on by the "C" washer 22A319 - both these parts wear as well as the gear.

Mini Spares also produce a ring 2 thou thicker 88G549 to...

($13.00) £13.00 exc vat

($15.60) £15.60 inc vat
DIFF HOUSING LOCK TAB ROD CHANGE LH
42H500

Left hand differential lock tab as used on rod change boxes up until 1982 when they were not longer used. For R/H locktab see 22A962

($0.91) £0.91 exc vat

($1.09) £1.09 inc vat
MINI SPARES COMBINED BLOCK/GEARBOX GASKET AND SEAL...
AJM100MS

Mini Spares best quality complete gasket and seal kit for engine block and gearbox,for all common engine types and sizes.



Also comes complete with Mini Spares Evolution clutch oil seal 13H2934MS, differential oil seals...

($26.00) £26.00 exc vat

($31.20) £31.20 inc vat
BAULK RING TO ORIGINAL ROVER SPEC PRE 2000
22G2033EVO

Mini Spares genuine part, made for reliability, because the current Rover 22G2033version is not good enough. These specials are CNC grooved for correct shape and machined for concentricity using the original type fixings to get the corr...

($13.23) £13.23 exc vat

($15.88) £15.88 inc vat
GOLD MAGNETIC SUMP PLUG
DP3

Extra strong magnetic sump plug. This high quality plug is constructed from 303 stainless steel and houses the latest Neodymium magnet which is currently the strongest available to give the best protection for your engine, even more important when yo...

($20.10) £20.10 exc vat

($24.12) £24.12 inc vat
RIGID ENGINE TO GEARBOX HALF MOON SEAL U
CAM6548

Originally developed by Rover to cut down on warranty hourly costs on powertrain warranty repairs, by their main dealers.-Labour time allowed at Rover dealers for fitting this seal was 3.4 hours labour rate.

This is a special rigid seal and ...

($4.00) £4.00 exc vat

($4.80) £4.80 inc vat
SPEEDO PINION COVER OIL SEAL.
AAU2304

Oil seal for speedo drive pinion cover (DAM8488)

($1.00) £1.00 exc vat

($1.20) £1.20 inc vat
DIFFERENTIAL THRUST WASHER 8 THOU OVERSIZE
BTA102

Genuine Rover fibre type are now 48 thou thick which is so tight it will probably lock your diff up, they used to originally be .035 thou. These are 43 thou oversize type for worn units but the correct size of 35 thou is available as BTA101<...

($1.80) £1.80 exc vat

($2.16) £2.16 inc vat
GEAR LEVER BUSH
22G389

The plastic bush at the base of the gear lever stalk ON REMOTE TYPE GEARBOXES ONLY--stops that rattling noise



fit to the gearlever, not the knuckle joint, if it falls of the gear lever there will be a lot of play

($3.50) £3.50 exc vat

($4.20) £4.20 inc vat
REVERSE SWITCH PLUNGER FOR GAE131
22G351

Plunger dowel for use with GAE131 reverse light switch on early gearboxes pre rod change.A fibre isolation washer must be fitted for switch to work which is available as 1B3664

($4.20) £4.20 exc vat

($5.04) £5.04 inc vat
LAYSHAFT A PLUS PERFORMANCE
C-22A1739

Minispares were the first company to produce these layshafts for performance engine/gearboxes as the standard type would flex and resullt in the breakage of the bearings causing seizure. Produced in an upgraded material and heat treated to the correc...

($31.85) £31.85 exc vat

($38.22) £38.22 inc vat
REVERSE LIGHT SWITCH REMOTE TYPE
GAE131

Genuine Mini Spares product, fits 3 and 4-synchro gearboxes except for rod change types which use GAE191. This switch replaces the plug on the front of the remote-shift transmission case. It is triggered internally by the shift linkage w...

($25.00) £25.00 exc vat

($30.00) £30.00 inc vat
3 SYNC 1st MOTION SINGLE ROLLER RHP/NSK
2A3709

Single roller bearing that only fits 3 synchro gearboxes to hold the 1st motion shaft-sporadic stocks only of these bearings as they went obsolete in 2008. These are genuine RHP/NSK bearings

($135.00) £135.00 exc vat

($162.00) £162.00 inc vat