Tailgate pin and chain for all pickup models, sold individually, 2 required per car.
This is the guide plate for the bonnet locking pin, now in stainless steel.
For MPI only when bonnet hook has been moved to central position.
This plate protects the bonnet lander panel from the hook and acts as a stiffener also. Stainless steel version.
Rear seat belt anchor mounting point as found on later cars. This panel needs to be welded into the C post.
Rear seat belt anchor mounting point as found on later cars. This panel needs to be welded into the C post.
Seat belt mounting anchorage in the centre of the rear bulkhead.
Full carpet black boot liner kit, 5.5 gallon tank, completely lines the inside of the boot area. For 7.5 gallon tank seeCCC118
Full carpet boot red liner kit,5.5 gallon tank completely lines the inside of the boot area.
FIA spec anchor plate for eye bolts, used when fitting harnesses. Sold individually, 7/16 UNF 65x65x3mm.
Gasket for the chrome base CZH3521 to door as fitted to factory production cars from 1970 -80.
The fixing holes to door are 2.1/8"(55mm)centres apart where as late cars are only 3/4" apart.
Genuine ashtray bracket that sits in the rear compaion bin on MK1 cars. This is RH side.
Genuine ashtray bracket that sits in the rear compaion bin on MK1 cars. This is LH side.
Good quality pressing rear upper side panel,used for converting clubman estates to van sides or repairing van upper section back to original when windows have been fitted. This is RH side.
Good quality pressing rear upper side panel,used for converting clubman estates to van sides or repairing van upper section back to original when windows have been fitted. This is L/H side.
Genuine Mini Spares product. The seal that goes on the neck of petrol tanks as protection against water intrusion and to also to make the hole look neater, so replace them when they crack or shrink through heat. This is the original fatter type as us...
Front A panel part of door frame with door stay hole for internal hinge cars right hand non gen.
Front A panel part of door frame for internal hinge cars Left hand.Non gen
Reinforced elastomer liner for door trim made from VELVEX to prolong the life of your door cards.Die cut on press tools that make the original door cards. Each hole for door locks, window winders, door handles, speaker holes are precision cut to fit ...
Non genuine repair panel for below the lights and above the rear valance, fits all models. Left hand side.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.