Showing 461 to 480 of 482

Gasket for SPI throttle body spacer. 2 required

Petrol tank sender unit for saloon models 1959 until 1964 screw on type, for Minis fitted with no voltage stabiliser.

A genuine original S.U. pump diaphragm, ethanol tolerant for AUF214.

Single layer straight forward replacement for double layer type and the spindle is 2 and three eights long.

Suitable for all cars with electric "pusher" pumps.

A genuine original S.U. pump gasket ethanol tolerant.

New ethanol tolerant diaphragm is AUB6097 a straight replacement.

Replacement points are available as AUB6106A.

An alternative shorter plasti...

Petrol tank sender unit for early estate models 1960-61 approx with internal tank which is obsolete.

Set of direct to head fuel injection to suit 2012 onwards C-AJJ4064 & C-AJJ4064RACE arden heads.



This is the same injection that is included in the full injection kit C-AJJ4065, but due to many customer requests it is now avalible ...

This is the original type of needle valve that governs the plastic fuel float in your SU carb.

An alternative better upgraded version is available as CA90.

8 Port injection loom with air intake sensor, water temp sender and TPS.

To convert a standard UK spec Single Point Injection car to HIF44 carb. This kit includes wiring looms,fuel tank,fuel pump, carb, air filter and inlet manifold.

Valvemaster Plus provides the best protection against valve seat recession after lead, while keeping your fuel system clean and providing excellent corrosion protection. Valvemaster Plus also contains a friction modifier to improve performance and ec...

Screw for holding the needle guide on HIF44, HIF38 carburettors. Also fits HS6.

Fuel tank to boot floor seal for cars that had a drain tube through the boot floor.

Weber DCOE twin cable linkage set top mount.



Fits on top of single or twin DCOE installations to provide a professional throttle linkage solution.



Supplied with 2 x throttle cables and associated pedal mounting h...

Complete kit for fitting an MPI tank, including tank, pump, sender and seals.

Black version of SP228



The "'flip top' and 'push button' opening cap was made famous by some of the most historic cars ever raced at such famous tracks as 'Monza' and 'LeMans'. The design was conceived for function not...

5.5 gallon left hand tank for early mk1 cars pre 1964 with the screw in sender (6 bolts). These are a modified version of our ARA359 tank which are modified by hand to accept the early sender unit (included). The twist and turn type sender unit tank ...

SU conversion Jet for conerting from a waxstat jet to conventional without having to buy a different linkage etc.

BBY Swinging needle, very slightly richer than the HIF44 BER low emission needle.