BUMPER HANDLE BAR TO OVERIDER SHORT BOLT 1/4" x 3/...
GFK5179

£0.13 exc vat

£0.16 inc vat

In stockIn stock
Fixes fan blade to water pump and corner bars to overider on deluxe bumpers. Also used for locating plate AHU2379.

£0.13 exc vat

£0.16 inc vat

In stockIn stock

Recommended usage 1 x GFK5179 to fit one mini.
850cc Mini & 997cc Cooper Block - Qty 3
998cc, 1100cc & 998cc Cooper - To 1980 - Qty 3
998cc, 1981 on, 'A' Plus Block - Qty 3
Cooper 'S' 970ccc & 1070cc & 1275cc MK 1/MK2 - Qty 3
Cooper 'S' MK3 (12H397/12H398) & 12G Eng Nos. - Qty 3
Radiator & Fittings - Qty 2
Camshaft and Timing Chain - Qty 3
Water Pump and thermostat - Pre 1996 Not MPI - Qty 4
Water Pump and thermostat from V134455 1275 MPI 96 - Qty 4
Radiators pre 1996 - Qty 2
Bumpers and Number Plates - Qty 4
Front Rubber Cone Spring Suspension ( Known as Dr - Qty 8
Front Suspension - Qty 8
Crankshaft Identification Chart - Qty 3
Cylinder head identification numbers - Qty 3

Recommended products
Alternative products

These screws were used on all A series engines that had simplex chains (duplex used countersunk heads AEA687 for clearance). These screws fitted into the main bearing cap holding the front timing gear plate to the engine.

Kit products

Specially designed for twin point injection cars. This kit has the 2 overiders and corner bars plus a stainless steel bumper with the pre stamped hole, plus fixings, for cars with 4 front driving lamps as fitted by Rover from 1997 on. Owing to the 4 ...

Car set of fixings to hold on the Deluxe type overiders and corner bars, complete with sealing rubber to bumper and spacers.

If you have standard overiders see kit MSSK011.

Quick Release Bonnet Hinges , MK3.one pair

Available for MK3 onwards Minis only. The MK3 Mini has hinges mounted differently from earlier models, these allow the bonnet to be quickly lifted off the car. If you've ever banged your head or cri...

This kit has 2 special overiders and 2 slightly shorter corner bars

for fitting to cars with 4 driving lamps when fitted as original equipment by the factory on all Twin point injection cars. This special kit was designed by Keith Dodd for ...

The "Deluxe" models of all Minis included bumpers with these fancy over-riders and corner bars. This rear only kit is designed to provide you all the pieces; including, all the bits and the bumpers!


Includes bumper, the complete overrid...

Timing cover front plate and tensioner plate bolt and washer kit. Comes with all parts to fit the cover except for the counter sunk screws if fitting a duplex kit (our duplex kits all come with these).

Battery bar and fitting kit for all pre 1990 cars whcih had the shorter battery bolts.

Battery bar and fitting kit for all post 1990 cars whcih had the longer battery bolts.

This kit includes all hardware to fit suspension to your front subframe. Also includes front damper mounting hardware and lower arm pins.

People also bought products

Boot hinge gaskets and fittings for original type hinges

This kit includes all hardware to fit suspension to your front subframe. Also includes front damper mounting hardware and lower arm pins.

Engine mount bolt kit for manual cars, 1 kit requried per car.

Lightweight drilled version of 21A2596. This bolt is drilled all the way through to allow easy adjustment of Hilos.

Competition crownwheel bolt for use with our LSD crownwheels, these are CNC machined from EN24T with a reduced head height for more gearbox clearance.

5/16" UNF THREAD 2 1/2" LONG bolt commonly used for 21A2838 petrol tank strap

Stainless steel version of GFK5184, worth keeping a few spare as they are one of the most common bolts fitted to the Mini.

Bolt for the top alternator bracket on mpi cars.

Stainless steel version of GFK5185, worth keeping a few spare as they are one of the most common bolts fitted to the Mini.

FIA spec anchor plate for eye bolts, used when fitting harnesses. Sold individually, 7/16 UNF 65x65x3mm.

Screw for chrome metal number plate lamp on mk3 19790 on - You will have to drill the lens out to take M4 screw.

m6x10 bolt--ideal for radiators with metric fittings (6 required for rads)

original imperial radiator screws were SH604031 or PK type were ARA1117

Clutch housing bolt to engine long 5/16" UNC 1.75" long Fitted ffrom 1985 for clutch housing instead of 22A152 stud

Special thread cutting screw 1/4 UNF 1.25" (31mm) long.

Screw to hold the lock assembly on the door of MK3 cars with internal hinges and wind up windows. On new doors or for easy fitment use these special screws with cutting thread (3 sided ...

Clutch housing bolt to engine long 5/16" UNF 1.75" long with tuflock patch to secure. Earlier bolts less tuflock are {link]BH605141{/link}

Self tap screw No10 for holding wiper motor strap to body and any other use.

M10 metric flanged bolt 35mm long for catalytic converter. (4 required per unit)