Downpipe to fit the original exhaust manifold on the late (from 1990) Mini Cooper and MG Metros when using HIF6/44 carburettors. Y piece outlet end is 1.875" outside diameter, 1.75" inside diameter.Without sensor hole
This allows you to dele...
LONG CENTRE BRANCH EXHAUST MANIFOLD FOR FUEL INJECTED CARS WITH A SENSOR TAKE OFF in main LCB body, THIS IS FOR USE WHEN THE CATALYST IS BEING REMOVED AND A RC40 EXHAUST IS BEING FITTED. If the catalyst is to be retained use [link]C-AEG3...
The popular RC-40 exhaust system has been updated for the year 2000. All retain the optimum size 1.75" tubing for maximum performance and efficiency, but we now offer a choice of tailpipe size and configuration. This one is the centre exit 2" outlet ...
Part of our millennium range of exhausts, this is the silencer that bolts to the catalyst enabling you to fit another silencer to it of your choice to give a 2 box rear silencer system for quietness.
The popular RC-40 exhaust system has been updated for the year 2000. All retain the optimum size 1.75" tubing for maximum performance and efficiency, but we now offer a choice of tailpipe size and configuration. In addition, they now have stainless s...
The popular RC-40 exhaust system was updated to the millennium range for the year 2000. All retain the optimum size 1.75" tubing for maximum performance and efficiency, but we now offer a choice of tailpipe size and configuration. This is 2.25" large...
The popular RC-40 exhaust system has been updated. All retain the optimum size 1.75" tubing for maximum performance and efficiency, but we now offer a choice of tailpipe size and configuration. This is a stainless steel centre exit with large bore 2....
A pair of fabricated steel inlets
these are the longer type for fitting weber carbs to the 8 port head but will require severe body modifications. they are however the answer to the best power available except injection. Please note these wi...
A pair of fabricated steel inlets for 8 port cylinder heads
this were made to take twin webers and fit under the bonnet but might require small amounts of modifications on some vehicles. 60mm long
Not tremendously efficient due to t...
This Maniflow exhaust system has the qualities you want: warm mellow sound, great looking center exit, 2" chrome plated tail pipe, and it bolts directly to the large bore LCB or 3-1 header.
The center exhaust hanger takes a lot of abuse during hard acceleration or if you're low enough to bottom out on bumps. This mount has a through metal bolt to keep it intact.
The popular RC-40 exhaust system was updated to the Millennium range in 2000. All retain the optimum size 1.75" tubing for maximum performance and efficiency, but we now offer a choice of tailpipe size and configuration. Front pipes come either "str...
The popular RC-40 exhaust system was updated to the millennium rangefor the year 2000. All retain the optimum size 1.75" tubing for maximum performance and efficiency, but we now offer a choice of tailpipe size and configuration. This is standard bor...
Better flowing as it has correct shape on every bend and painted grey
This is the stainless steel pipe that bolts to the catalyst and then allows you to fit the rear silencer of your choice.
Mini Spares genuine RC40 system has justifiably earned the reputation of the best exhaust ever made for the Mini. Mild steel with stainless steel tailpipe. Typically used with an LCB manifold it gives great performance with a mellow soun...
The popular RC-40 exhaust system was updated to the millennium range for the year 2000. All retain the optimum size 1.75" tubing for maximum performance and efficiency, but we now offer a choice of tailpipe size and configuration. In addition, they n...
Standard bore LCB (1-3/4"id) that is ideal for very hot small bore engines, for standard to high performance 1275s and for street 1380s.
There is NOT enough clearance room when fitting to old cars with rubber couplings which foul. Using [lin...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.