For the medium bore Maniflow LCB Y piece or AN180V. 48mm ID

£4.50 exc vat

£5.40 inc vat

Large bore LCB for competition use or on very large bore street engines; such as 1400cc+. Y-piece outlet end is 2" outside diameter, 1.875"id.

The best quality production exhaust manifold available from Minispares. The Long Center Branch...

£221.27 exc vat

£265.52 inc vat

BLANKING PLUG INLET MANIFOLD & CYL HEAD

ADP210

This 5/8unf steel hexagonal head blanking plug was made for the inlet manifolds where the servo union can be fitted, plus blanking off the thermal transmitter hole under the thermostat. Uses 1B3664 washer ----------please note this will ...

£3.57 exc vat

£4.28 inc vat

EXHAUST MANIFOLD CLAMP FOR 1990 ON 1275 CARB MINI

GEX7801

Twin Down pipe clamp for Carb Coopers 1990 on wards, and Metro's.

Also used as a single clamp on manifold for cars fitted with HIF38 carb cars from 1991 on.

£2.95 exc vat

£3.54 inc vat

MANIFOLD TO DOWNPIPE EXHAUST CLAMP

GEX7046

Exhaust manifold to downpipe clamp.

The key to eliminating exhaust leaks at the manifold flange is the clamp. These new clamps include proper brass nuts and support washers. Fits most 850cc, 948cc, 998 etc. Those engines with single carb an...

£2.50 exc vat

£3.00 inc vat

EXHAUST U BOLT CLAMP 1.1/4" 32mm

GEX9002

£0.68 exc vat

£0.82 inc vat

MANIFOLD GASKET FOR FUEL INJECTED CARS

GUG704053MG

Special reinforced gasket for injection cars has metal inserts on exhaust ports plus a metal back on the manifold side which makes surface easier to clean when replacing. Often used on Turbo cars when correct gasket is in short supply.

...

£5.10 exc vat

£6.12 inc vat

EXHAUST HANGER BRACKET ON REAR OF REAR SUBFRAME

C-ARA671

This is a bolt on conversion bracket to fit on the rear of the rear subframe to take the later type rubber strap mounted exhaust systems.Later subframes 1991 on had these parts welded in position.

£12.96 exc vat

£15.55 inc vat

MANIFLOW 2" BORE EXHAUST SYSTEM LST5A SIDE EXIT TW...

C-ARA334

2" bore twin box exhaust system. Rear side exit in the standard position. If the 1.75" bore of the RC-40 isn't enough and you want to make it better, and louder, this 2" Maniflow system is for you. Very high quality, with skid plate on the bottom of ...

£198.75 exc vat

£238.50 inc vat

MANIFLOW VAN AND PICKUP TWIN BOX EXHAUST SYSTEM

C-ARA339

The long wheel base of the Mini Van, Wagon and Pick-up means the popular RC-40 exhaust comes up a little short! This system from Maniflow (pipes, resonator and muffler), is made for the long bodies. It has the same great flow characteristics of the ...

£146.28 exc vat

£175.54 inc vat

MANIFOLD 3 INTO 1 STD BORE-LM7

C-STR332

Standard bore Maniflow 3-1 header.

£257.42 exc vat

£308.90 inc vat

PERFORMANCE STAGE ONE KIT HS4/HIF38 1275

C-STN18

This kit includes top quality items inlet and exhaust manifolds, RC40, K&N filter element, all gaskets required and a correct new needle for spring biased HIF38 or HS4 1.5"carbs only. See C-STN18B for same kit but with centr...

£241.79 exc vat

£290.15 inc vat

MANIFOLD LCB SMALL BORE EXHAUST (LM2)

C-STR817

Small bore Maniflow LCB. Has a 1.5" outer diameter 1.375" internal diameter bore size. STD mini exhaust and downpipe size is 1.250".

If the 1.375" tapered end of about 2" is removed a 1.750 pipe will fit over remaining length of outlet pipe.

£117.72 exc vat

£141.26 inc vat

EXHAUST MIDDLE MOUNTING

GEX7081

Middle exhaust mounting, bolts on to the front of the rear subframe and is the central or first of the rubber mountings. see GEX7081POLY for Poly type or if you are fed up with breakages see C-19G3257.The original Genuine pa...

£1.60 exc vat

£1.92 inc vat

EXHAUST CENTRE STRAP.SALOON

GEX7082

Exhaust centre strap that hangs from the mounting on the centre of the rear subframe, for saloon models only as the van is longer(GEX7273).

The clip on the exhaust that this attaches to is GEX7052 and is usually on a new exhaust...

£2.42 exc vat

£2.90 inc vat

EXHAUST U BOLT CLAMP 2 1/4" 58mm

GEX9011

£0.92 exc vat

£1.10 inc vat

EXHAUST RC40 CLASSIC EXHAUST MILD STEEL AND FITTIN...

RC40PACKAGE001

Original side exit RC40 Std bore exhaust, LCB short downpipe and fitting kit.

This includes the short downpipe for use with the Long Centre Branch type manifold. Use manifold C-AEG365.

£73.31 exc vat

£87.97 inc vat

PERFORMANCE STAGE 1 KIT HS4/HIF38 1275 BIG BORE CE...

C-STN18B

Performance Stage one kit for 1300cc models with HS4 or HIF38 Carb with centre exit large bore exhaust system.

Always get your car rolling roaad tested for best ignition/timing and emmissions after fitment.

£289.89 exc vat

£347.87 inc vat

MANIFOLD STD BORE MILLENNIUM LCB WITH CAST FLANGES

C-AEG364

Standard bore Budget priced LCB (1-3/4"id) with pre cast flanges to improve flow and save engine tuners time matching the ports. This is ideal for very hot small bore engines and for standard to high performance 1275s, including road 1380s.

£64.50 exc vat

£77.40 inc vat

STAGE ONE KIT LESS NEEDLE FOR FURTHER STAGES OF TU...

C-STN16

STAGE 1 KIT. Mini Spares bolt-on performance kit for 998 and 1098 engines gives 20% more power and 12% more torque.

This money saver kit however is for further stages of tune and contains a Maniflow LCB exhaust manifold- twin box RC...

£231.30 exc vat

£277.56 inc vat