Stainless steel polished locking cap for all post 1970 cars-non vented.
Comes with 2 keys.
Fuel tank sender unit for saloons up from 1964 to 1992 when a voltage stabiliser was fitted.1964 built cars could have had a similar locking ring type but if no voltage stabiliser fitted on back of speedo they fitted a ARA959 which is ob...
Fuel pump with filter for injection models where the pump is located inside the tank. This pump was originally for the twin point but is now used on both Single or Twin point injection models as the ECU adjusts the pressure on demand.
See [l...
Ideal well priced electric fuel pump for replacing either electric or mechanical pumps when using single HS or HS2 twin carbs 4.00-5.5 PSI delivering 18 gallons per hour.
Other parts required to fit this pump are:
FPA9...
Service kit for the following carbs: FZX1306, FZX1307, FZX1280, FZX1281, FZX1409, FZX1412, FZX1429, FZX1433, FZX1462, FZX1524, FZX1526, FZX1525, FZX1531, FZX1469, FZX1312, FZX1366, FZX1422, FZX1428, FZX1443, FZX1468, FZX1529, FZX1419.
If fuel is overflowing the float bowl the needle valve is leaking. This may be caused by the float WZX13040(GSU200) being misadjusted, stuck or leaking OR the needle may be fouled with a bit of grit or worn and not sealing. This is an
altern...
Pumping 40 gallons per hour this is ideal for big bore/stroked engines with twin choke or split carbs over 45mm choke size and will require 5/16" fuel lines
Anchor bracket that fits to the rear seat bulkhead to hold the petrol tank retaining straps on R/H extra tank when fitted.
Jet tube for twin SU carb: If you have a single carb, use AUD9098A although some people interchange with this one. This is for the left hand or front carb and identified by a green band.
20 degree float angle.
Seal for Saloon petrol tank sender unit and the retainer clip is ARA1501. Early type tanks had 6 screws holding the sender unit in place and the gasket is GUG705711GM. .
Latest design jet fitted to the HS6 carb, it had a metal base rather than plastic and was called a waxstat type.
5" long steel intake manifold by Maniflow for Weber 45 DCOE/DHLA.
stel fabricated 7" long mainifold for the weber 48DCOE
proven to give the best flow of any manifold available
5/16" bore petrol/diesel hose which is sold per metre - also useful as hose for emission or evaporate loss control pipes and expansion tank to radiator use. Suitable for ethanol based products such as modern day fuels. 50psi max. R6 spec.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.