Master cylinder base plate for cars with servo built into the brake master cylinder from 1989 on.
Genuine Mini Spares mouldings.
These brightwork steel mouldings include the rubber window scraper, are standard on all wind up window minis and are also available with the black plastic ends introduced as a safety requirement on later minis....
complete tailgate for the mini pick up from genuine tooling but less the hinges
genuine panel that holds the headlamp assembly on the mini clubman versions.
this is the right hand side
Also se kits MSSK017 and MSSK017B
Genuine lower hinge--note, the 2 studs actually thread into the genuine hinge so can be replaced if damaged or broken
This is Rovers tailor made plastic boot liner which fits all cars with the larger 7.5 gallon petrol tank fitted from about 1974 on. Fits over the spare
wheel giving a very sturdy load floor with a recess for polish or small tools etc. If thi...
High tensile long cylinder head stud, 4 required per head, sold individually. Torque to 42lb/ft. See also the complete kit which includes these top grade studs C-AHT279.
this non genuine panel has all the fitting holes and metric M6 castellated nuts for the rear fog lamps which were fitted as standard from 1983 on. The M6 bolts required are 10mm long and DYP10002 can be used. The wiring grommet for this ...
Genuine Mini Spares product,the complete window mechanism on its backplate for wind up window minis L/H.
LH - locating tab faces towards the front of the car, arms bending outwards when at top. Rear arm protrudes further from the r...
original metal black painted corner bumpers fitted to late vans.Owing to the price of the stainless steel equivalent 14A7550S these are usually ordered only for customers requirements.
The lower metal front dash panel that you would actually put your stuff on and is usually covered by vinyl cloth or cardboard.
This panel is NOT now a complete solid type panel as per early cars and now looks like a fabricated piece of metal...
THE MINI COOPER LAUREL FOR THE SIDE OF THE CAR IN WHITE--OFTEN SEEN ON BOOTLIDS AS WELL
Left hand rear
Genuine moulded wheel arch as fitted to the sports pack mini with 13" wheels has now been upgraded with a brass insert to take a stud ZUA000250. This item does not include the stud or the black rubber seam mouldin...
All four of the templates required to fit the Sportspack wheel arches are available on our website and can be downloaded for FREE
This is the detachable mast part of the roof arial on the twin point cars.
The base unit is XUF000020.
this is the factory standard long aerial, not a short one
measures @ 78cm
promotional sticker to advertise your favourite mini parts supplier who just happens to be the largest in the world bar none- WORD MINI SPARES in white with love heart emblem in middle on clear background,external stickers
rear fog lamp bracket which attaches to the rear valance -right hand drive only.
If you have fitted the old type overiders and corner bars for the Retro look you will need to fit a modified bracket MSS024 which is basically the left hand dri...
Mkl Mini door seals were unique in both shape and texture, they had a natural rubber finish and a pronounced point on the sealing edge. These are the only seals that should be used on sliding window cars. Later seals are too big and place undue stres...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.