Identical to the GXE1002 competition alternator but with a larger pulley designed to stop over charging the alternator on race cars which spend the majority of time at high rpm. Weight 3.277 kg.
Genuine Bosch lambda sensor, fitted to both the twin and single point injection cars and fitted in the same exhaust manifold shared by both cars. Be warned the cheaper non branded sensors cause lots of issues hence we only sell the Bosch version.
Main and dash wiring loom except ECU engine harness for SPI Cooper with no dim dip to SN58746, no alarm --no longer available from Rover.
Lightweight aluminium mounting bracket for PS-20 Lithium Ion battery.
The smallest pre engaged starter motor available for the A series yet still producing 1.3KW of power! Ideal for race/tuned cars with high compression and cars that need more room for oil coolers etc. See GXE1004EVO for inertia.
The smallest inertia starter motor available for the A series yet still producing 1.3KW of power! Ideal for race/tuned cars with high compression and cars that need more room for oil coolers etc. See GXE1005EVO for pre engaged.
This will replace the orange lens fitted on the wing of all cars from 1986 on, fitted with an orange LED. If you need a new loom for this lamp see AFU3358. Sold singly. Does not require a resistor.
LED side repeater lamp for all 1986 on cars. No resisitor required
Stainless steel small battery cable retaining bracket bolted at the front of the engine for pre engaged manual cars approx 1985 onwards.
Mini Mk 4 998 oval centre dash,twin column stalks,rocker switches including rear fog and heated rear window,reverse lights and rear fog lamp is on headlamp circuit. Intertia starter. To go with AN145 rear loom.
mainly for 1980-1...
Crank sensor and bracket kit for our management pulley C-AEG456.
Dip switch lead for right hand drives cars, these are not included with new looms.
Dip switch lead for left hand drive cars, these are not included with new looms.
Reverse lamp as used on some Mokes/kit cars etc, essentially the same as our indicator lamp CHM13WHITE but with a clear single filament bulb rather than orange and white plastic lens.
Emerald K6 ECU as supplied in our 8 port injection kit.
K6 ECU specification in Brief:
6 ignition & 6 injection drivers
3 speed triggers, digital or inductive
Air, ...
This is an ultra reliable universal hazard light module kit for any Mini that did not have hazard lights as standard (pre 76 cars).
A discreet but important safety upgrade for all classic vehicles.
Should you ne...
Replacement module for Minispares Evolution distributors. Black wire to "C" and red wire to "B" terminal.
Lightweight high power pre engaged starter motor designed for competition cars with an oil cooler mounted at the front.
Battery bar and fitting kit for all pre 1990 cars whcih had the shorter battery bolts.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.