Big end shell bearings for the 1275 larger 1.75" diameter rod pin-not Cooper S

( Tri-Metal )

Sintered copper lead, lead plated,steel backed

Nominal Composition

Copper 74%

Lead 24%

Tin ...

Black Fibre composite head gasket for performance use head, for all 850/998/1100 engines especially with large overbores up to 100 thou oversize.

2.8cc compressed volume. Latest type of gasket material used by many automotive producers, to...

I gallon 20/50 classic oil with original look jug from the 60s

Vented oil filler cap that should be change every 12 thousand miles.

the original flat cap type 12A402 without breather filter on early minis has now been deleted by Rover and replaced by this filter type.Cheaper Alternative to ...

Price per rod - correct length for 8 port head. Larger 6.35mm diameter widening to 8mm centre, giving a javelin type shape to help clearances. 3 piece push rod (2 ends and 1 rod) which are loctited although once fitted the parts cannot displace and m...

This thermostat housing fitting kit, suitable for all single tier thermostat housings. Comes with new studs, nuts, washers and Klinger thermostat housing gasket

Water pump fitting kit for models without bypass facility, includes new bolts, washers and superseal gasket.

Minispares own stainless steel manifold stud and 6 sided hexagon nut kit.

For mutipopint nut kit see C-STR287

Quantity required one kit per car

Complete stud, nut and washer kit for the cylinder head ancillaries. Kit contains parts to retain the following:

Inlet/Exhaust manifold to head, studs/nuts/washers

Thermostat housing (no sandwich plate) studs/nuts/washers

H...

3 layer steel head gasket especially suitable for full race engines up to 73.5mm

bore where it has larger bore holes and considered the ultimate head gasket.

Especially recommended for 8 port heads as it has no fire/compression ring...