A favourite consumable goods item used for many purposes using no 10 screw, also fits early rad cowlings that use ARA1117 screws.

Larger than the S6007 chrome lamps and narrower than the RL020 these black plastic backed lamps also find their way on single and twin point injected cars as replacements for the original Rover lamps.

Bulbs are H3 t...

Gold palladium projected electrode nose which has good ignitability on low voltage for 998/1275 engines in standard form--upgrade to BP6ES. Price is for one spark plug.

A working car horn is not only a necessity it is also a legal requirement in England and most other countries.This twin upgrade open trumpets is just the set you need to be heard.

Mk1 tail lamps each have a pair of heavy rubber foam gaskets. One between the lens and the chrome base, a similar one between the base and the body. Since they are exposed to the sun and easily visible, faded or rotted gaskets can ruin the look of...

Four LA1009 halogen black bodied driving lamps approximately 170mm wide by 58m deep with 4-XBU10046 stainless steel fitting brackets.

The stock vacuum advance distributor is connected to the carb/manifold by a small rubber joint that in turn is mated to metal line that fits the distributor. If the little rubber connector is deteriorated it could allow a vacuum leak at the carb and ...

These points were fitted from 1974-80 when the distributors became a 45D type,

the distributor cap shape changed also to GDC136 and likewise rotor arm GRA2114 and condenser GSC2109.

This was the first mini distributor cap to have screws hold the cap to the body from about 1990 on, when electonic ignition was introduced. Therefore there is no points or condenser but the rotor arm to use is GRA2143. Fits all 1992 onwa...

All the horns we sell have a bracket on them but this is the original type from Rover.