With an integral push start button built in the solenoid as originally fitted to early minis. The activation of the starter motor starts with the key (or push button in the early cars), but the most important function is carried out by the solenoid....
Electronic Ignition distributor, fitted as standard to all 1300 Carb Cooper models. Also Metro 1275cc engine.
Replacement service items for this are:
Cap GDC156
Rotor arm GRA2143
Should be used with GC...
Fitted from 1990 to 1275CC Cooper with HIF44 carburettor.
See RTC3993 for HIF38 carburettor 1275 cars
Fits 64DM4 distributors fitted to 1992 to 1275CC cars with HIF38 carburettor.
See BAU5309 for HIF44 carburettor 1275 cars.
Interior lamp bayonet type bulb from late 1984-10 watt the same size fitting as GLB207 which is often used although only 5 watts.
The current large plastic shield without any fittings or clips, to cover the engine electrics. Might need slight modifications for some SPI cars but we have fitted them on our own cars without any problems.
The plastic clips are available as...
Cooper cars with HIF44 carb from 1990-91 R/H/D with pre engaged starter,side repeater lamps on wings, 3 clock instruments--The Cooper LE(RSP) 1990 model has different loom listed as YMC11388 but this loom has been used by trade customers...
Rear body harness with speaker wires,known as thin wall PVC type type which replaced the thick wall type in 1989. AN166 is the thick wall early equivalent.
If your car has no speakers just disregard the extra wires. This loom ha...
12v Cigarette lighter, ideal for running phone chargers etc. For mounting bracket, please see part number L28000
Was HAM3066 main loom less the wing side repeaters but superseded by Rover to this loom with side repeaters on wing,although the manufacturer of these looms always added them to HAM3066 anyway -Inertia starter, Ballast coil, Instrument cluster in fro...
Courtesy switch for MPI minis from 1996 when the wiring was changed from bullet type to spade connection. This is the switch that fitted into the A post to turn the interior light on and off, the earlier switch is no longer available so if you have a...
The current large plastic shield with fittings to cover the engine electrics on Automatic engines.With upper 2 plastic clips-- The plastic clips are available as 13H6461---These are BHM1675 but cut 4.75" shorter with a slot for the lower...
THE LENS FIXING SCREWS FOR THE REAR LENS ON MK4 1976 ON WITH REVERSE LENS ARE ALL THE SAME. SOLD INDIVIDUALLY. ALSO FITS TWIN POINT FRONT INDICATOR LAMP.
3 per lamp required or 6 per car set.
Bracket for attaching the Distributor water shield block to gearbox stud/bolt
Does not come with fixing clips, these are available seperately as part number 13H6461
Upper bracket-NJU10002
Lower bracket- JZV1073
The...
Bracket for attaching the Distributor water shield to the rocker cover bolts.
Does not come with fixing clips, these are available seperately as part number 13H6461.
Main and dash wiring harness for SPI model from chassis number 103113 to 134454 with dim dip and immobiliser alarm--about 1994 on--UK cars all had dim dip-this loom is not available from Rover from June 2008 but can be made with sample or fairly clos...
ECU for mini automatic---Japan spec SPI from 1996 on----
Exchange ECU-you have to send in your correct old unit for repair -turn around on this is usually 1 week--there are no donor bodies available which is why we require your unit with its...
Harness to ECU for SPI manual models to chassis number BD 059821 has 2 plugs that connect to the ecu.
SPI with dim dip-fuel injection cars. Just the main loom only, does not include the engine harness or rear loom. With factory alarm.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.